EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Uni‐Axial Densification of Slurry‐Casted Li₆PS₅Cl Tapes: The Role of Particle Size Distribution and Densification Pressure

Quoc-Anh Tran, Meenal Agrawal, Michael Häusler, Johannes Hörmann, Mohsen Sadeqi Moqadam, Günther J Redhammer, Ingeborg Sellæg Ellingsen, Mir Mehraj Ud Din, Per Erik Vullum, Roman Zettl, Timo Danner, Arnulf Latz und 3 weitere

Advanced Materials · 2025-07 · 37 (30)

DOI: 10.1002/adma.202501592 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 19.05.2025. Verfasst von Quoc-Anh Tran und 14 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, NTNU Norwegian University of Science and Technology, Trondheim, 7034, Norway. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Norges Forskningsråd, Bundesministerium für Bildung und Forschung, Österreichische Forschungsgemeinschaft.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solid‐state batteries are transformative solutions for electric vehicles, offering superior energy density and safety. Sulfide‐based solid electrolytes like Li₆PS₅Cl (LPSCl) combine high ionic conductivity and mechanical adaptability, but challenges remain in scaling up high‐performance separator tapes due to particle size distribution (PSD) and processing constraints. This study investigates the uni‐axial densification of slurry‐casted LPSCl tapes, focusing on PSD refinement and compaction pressure. Wet milling has been identified to effectively reduce PSD to submicron levels while preserving structural integrity and near‐pristine conductivity. A critical pressure threshold (≈350 MPa) for tape‐casted LPSCl slurries (2.5% hydrated poly(acrylonitrile‐co‐butadiene)) is identified, where ionic conductivity peaks due to particle fusion and the formation of conductive networks. However, open porosity (≈30%), particularly along the densification direction, and surface irregularities persist. These structural issues have significant implications for battery performance. For example, surface roughness and interfacial voids lead to localized current focusing, with current densities exceeding applied values by over 20 times. Percolating porosity accelerates dendritic failure modes, undermining stability and limiting cycling rates. This work underscores the need for optimized powder processing and densification techniques to enhance scalability and performance, advancing LPSCl‐based separators for the practical adoption of solid‐state batteries in electric vehicles and other high‐energy applications.

Schlagwörter

Stichwörter der Autor:innen

Li₆PS₅Cldensificationparticle size distributionsolid‐state batterytape casting

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, NTNU Norwegian University of Science and Technology, Trondheim, 7034, Norway.
  • Christian Doppler Laboratory for Solid-State Batteries, NTNU Norwegian University of Science and Technology, Trondheim, 7034, Norway.
  • Materials Center Leoben Forschung GmbH, Leoben, 8700, Austria.
  • German Aerospace Center (DLR), Institute of Engineering Thermodynamics, 89081, Stuttgart, Germany.
  • Helmholtz Institute Ulm for Electrochemical Energy Storage (HIU), 89081, Ulm, Germany.
  • Department of Chemistry and Physics of Materials, University of Salzburg, Salzburg, 5020, Austria.

ORCID-Profile: Daniel Rettenwander

Förderung

  • Norges Forskningsråd
  • Bundesministerium für Bildung und Forschung
  • Österreichische Forschungsgemeinschaft
  • Christian Doppler Society
  • Austrian Federal Ministry for Digital and Economic Affairs
  • the National Foundation for Research, Technology and Development and the Christian Doppler Research Association (Christian Doppler Laboratory for Solid-State B…

Zitieren

APA

Tran, Q. A., Agrawal, M., Häusler, M., Hörmann, J., Moqadam, M. S., Redhammer, G. J., Sellæg Ellingsen, I., Din, M. M. U., Vullum, P. E., Zettl, R., Danner, T., Latz, A., Hennige, V., Brunner, R., & Rettenwander, D. (2025). Uni‐Axial Densification of Slurry‐Casted Li₆PS₅Cl Tapes: The Role of Particle Size Distribution and Densification Pressure. Advanced Materials, 37(30). https://doi.org/10.1002/adma.202501592

Vancouver

Tran QA, Agrawal M, Häusler M, Hörmann J, Moqadam MS, Redhammer GJ, et al. Uni‐Axial Densification of Slurry‐Casted Li₆PS₅Cl Tapes: The Role of Particle Size Distribution and Densification Pressure. Advanced Materials. 2025;37(30). doi:10.1002/adma.202501592

BibTeX
@article{Tran2025,
  author = {Tran, Quoc-Anh and Agrawal, Meenal and Häusler, Michael and Hörmann, Johannes and Moqadam, Mohsen Sadeqi and Redhammer, Günther J and Sellæg Ellingsen, Ingeborg and Din, Mir Mehraj Ud and Vullum, Per Erik and Zettl, Roman and Danner, Timo and Latz, Arnulf and Hennige, Volker and Brunner, Roland and Rettenwander, Daniel},
  title = {Uni‐Axial Densification of Slurry‐Casted Li₆PS₅Cl Tapes: The Role of Particle Size Distribution and Densification Pressure},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {30},
  doi = {10.1002/adma.202501592}
}
Kostenlos starten →