EUVIMEDEUVIMED entdecken
Crossref

CNT‐Supported RuNi Composites Enable High Round‐Trip Efficiency in Regenerative Fuel Cells

Chunfeng Li, Danning Li, Lubing Li, Haozhou Yang, Yan Zhang, Jinzhan Su, Lei Wang, Bin Liu iD

Advanced Materials · 2025-05 · 37 (18)

DOI: 10.1002/adma.202500416 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 20.03.2025. Verfasst von Chunfeng Li und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore, 117585, Singapore. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 68 Literaturangaben. Gefördert von: National University of Singapore and Ministry of Education, Agency for Science, Technology and Research, National Research Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Regenerative fuel cells hold significant potential for efficient, large‐scale energy storage by reversibly converting electrical energy into hydrogen and vice versa, making them essential for leveraging intermittent renewable energy sources. However, their practical implementation is hindered by the unsatisfactory efficiency. Addressing this challenge requires the development of cost‐effective electrocatalysts. In this study, a carbon nanotube (CNT)‐supported RuNi composite with low Ru loading is developed as an efficient and stable catalyst for alkaline hydrogen and oxygen electrocatalysis, including hydrogen evolution, oxygen evolution, hydrogen oxidation, and oxygen reduction reaction. Furthermore, a regenerative fuel cell using this catalyst composite is assembled and evaluated under practical relevant conditions. As anticipated, the system exhibits outstanding performance in both the electrolyzer and fuel cell modes. Specifically, it achieves a low cell voltage of 1.64 V to achieve a current density of 1 A cm − 2 for the electrolyzer mode and delivers a high output voltage of 0.52 V at the same current density in fuel cell mode, resulting in a round‐trip efficiency (RTE) of 31.6% without further optimization. The multifunctionality, high activity, and impressive RTE resulted by using the RuNi catalyst composites underscore its potential as a single catalyst for regenerative fuel cells.

Schlagwörter

Stichwörter der Autor:innen

MEARu‐based catalystregenerative fuel cellround‐trip efficiencywater splitting

Autor:innen und Institutionen

  • Department of Chemical and Biomolecular Engineering, National University of Singapore, Singapore, 117585, Singapore.
  • International Research Center for Renewable Energy & State Key Laboratory of Multiphase Flow in Power Engineering, Xi'an Jiaotong University, Xi'an, 710049, China.
  • Centre for Hydrogen Innovations, National University of Singapore, Singapore, 117580, Singapore.

ORCID-Profile: Bin Liu

Förderung

  • National University of Singapore and Ministry of Education
  • Agency for Science, Technology and Research
  • National Research Foundation
  • Centre for Hydrogen Innovations at NUS
  • National Nature Science Foundation of China
  • National Natural Science Foundation of China

Zitieren

APA

Li, C., Li, D., Li, L., Yang, H., Zhang, Y., Su, J., Wang, L., & Liu, B. (2025). CNT‐Supported RuNi Composites Enable High Round‐Trip Efficiency in Regenerative Fuel Cells. Advanced Materials, 37(18). https://doi.org/10.1002/adma.202500416

Vancouver

Li C, Li D, Li L, Yang H, Zhang Y, Su J, et al. CNT‐Supported RuNi Composites Enable High Round‐Trip Efficiency in Regenerative Fuel Cells. Advanced Materials. 2025;37(18). doi:10.1002/adma.202500416

BibTeX
@article{Li2025,
  author = {Li, Chunfeng and Li, Danning and Li, Lubing and Yang, Haozhou and Zhang, Yan and Su, Jinzhan and Wang, Lei and Liu, Bin},
  title = {CNT‐Supported RuNi Composites Enable High Round‐Trip Efficiency in Regenerative Fuel Cells},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {18},
  doi = {10.1002/adma.202500416}
}
Kostenlos starten →