EUVIMEDEUVIMED entdecken
Crossref

Titanium‒Nickel Dual Active Sites Enabled Reversible Hydrogen Storage of Magnesium at 180 °C with Exceptional Cycle Stability

Haotian Guan, Jiang Liu, Xuan Sun, Yangfan Lu iD, Hongyuan Wang, Qun Luo, Qian Li, Fusheng Pan

Advanced Materials · 2025-07 · 37 (26)

DOI: 10.1002/adma.202500178 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 21.04.2025. Verfasst von Haotian Guan und 7 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, National Engineering Research Center for Mg Alloys, National Key Laboratory of Advanced Casting Technol…. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 76 Literaturangaben. Gefördert von: National Key R&D Program of China, Fundamental Research Funds for the Central Universities, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Enhancing hydrogenation and dehydrogenation (de/hydrogenation) kinetics without compromising cycle stability is a major challenge for Mg‐based hydrogen storage materials (Mg/MgH 2 ). The de/hydrogenation reactions of Mg/MgH 2 are one of the gas–solid reactions involving hydrogen adsorption, dissociation, diffusion, and nucleation, which often results in the catalysts being unable to simultaneously accelerate these distinct kinetic processes. Here, the Mg 2 Ni@Ti─MgO catalyst with dual active sites is reported to be designed to address this issue. The stabilization of Ti 2+ and Ti 3+ valence states in the MgO lattice simultaneously accelerates hydrogen adsorption and dissociation. Additionally, Mg 2 Ni serves as a hydrogen diffusion and nucleation center, synergistically enhancing de/hydrogenation reactions. Consequently, it enables MgH 2 to release 5.28 wt.% H 2 in 2 min at 280 °C, and achieves 1.96 wt.% H 2 of hydrogen release in 60 min at 180 °C. The Mg 2 Ni@Ti─MgO catalyst exhibits remarkable chemical stability at the interfacial structure, minimizing structural and chemical degradation impact, and realizing excellent de/hydrogenation performance over 1000 cycles. These results provide a new methodology for optimizing multiple kinetic steps, attaining highly efficient and stable de/hydrogenation reactions.

Schlagwörter

Stichwörter der Autor:innen

De/hydrogenationMgTi‐based catalystcycling stabilityhydrogen storage

Autor:innen und Institutionen

  • College of Materials Science and Engineering, National Engineering Research Center for Mg Alloys, National Key Laboratory of Advanced Casting Technologies, National Innovation Center for Industry-Education Integration o…
  • Chongqing Institute of New Energy Storage Materials and Equipment, Chongqing, 401135, China.
  • Materials Genome Institute, State Key Laboratory of Advanced Special Steels, Shanghai Key Laboratory of Advanced Ferrometallurgy, Laboratory for Microstructures, Institute of Materials, School of Materials Science and E…

ORCID-Profile: Yangfan Lu

Förderung

  • National Key R&D Program of China
  • Fundamental Research Funds for the Central Universities
  • National Natural Science Foundation of China
  • Chongqing Science and Technology Commission
  • National Key Research and Development Program of China

Zitieren

APA

Guan, H., Liu, J., Sun, X., Lu, Y., Wang, H., Luo, Q., Li, Q., & Pan, F. (2025). Titanium‒Nickel Dual Active Sites Enabled Reversible Hydrogen Storage of Magnesium at 180 °C with Exceptional Cycle Stability. Advanced Materials, 37(26). https://doi.org/10.1002/adma.202500178

Vancouver

Guan H, Liu J, Sun X, Lu Y, Wang H, Luo Q, et al. Titanium‒Nickel Dual Active Sites Enabled Reversible Hydrogen Storage of Magnesium at 180 °C with Exceptional Cycle Stability. Advanced Materials. 2025;37(26). doi:10.1002/adma.202500178

BibTeX
@article{Guan2025,
  author = {Guan, Haotian and Liu, Jiang and Sun, Xuan and Lu, Yangfan and Wang, Hongyuan and Luo, Qun and Li, Qian and Pan, Fusheng},
  title = {Titanium‒Nickel Dual Active Sites Enabled Reversible Hydrogen Storage of Magnesium at 180 °C with Exceptional Cycle Stability},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {26},
  doi = {10.1002/adma.202500178}
}
Kostenlos starten →