EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Control Over Metal‐Halide Reactivity Enables Uniform Growth of InSb Colloidal Quantum Dots for Enhanced SWIR Light Detection

Muhammad Imran iD, Da Bin Kim iD, Pan Xia, Francisco Yarur Villanueva, Benjamin Rehl, Joao M Pina, Yanjiang Liu, Yangning Zhang, Oleksandr Voznyy, Eugenia Kumacheva, Sjoerd Hoogland, Edward H Sargent iD

Advanced Materials · 2025-03 · 37 (12)

DOI: 10.1002/adma.202420273 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 11.02.2025. Verfasst von Muhammad Imran und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electrical and Computer Engineering, University of Toronto, 10 King's College Road, Toronto, ON, M5S 3G4, Canada. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

InSb colloidal quantum dots (CQDs) hold promise in short‐wave infrared sensing; however, their synthesis presents ongoing challenges, particularly in achieving precise size control – this is the result of poorly controlled reactivity among the precursors. Herein, the use of alkyl‐phosphine and amine‐based organic additives to control the reactivity of In and Sb precursors during the nucleation and growth of CQDs is developed. This interplay between organic additive and precursors enables the synthesis of InSb CQDs having narrowed size distributions; and bandgaps tunable across the 1.2–1.5 µm spectral range; all this leading to peak‐to‐valley ratios >1.4 in absorption spectra. The CQDs are surface‐terminated with a mixture of oleylamine, halides, and oxide‐like species, and this hinders ligand exchange reactions and subsequent integration into photodiodes. We therefore resurface the CQDs with alkanethiols, displacing the native ligands via an acid‐base mechanism, an approach that removes oxide species. Using a layer‐by‐layer fabrication process, the ligands of the resurfaced InSb CQDs are exchanged with short organic and halide ligands and incorporated films into n‐i‐p photodiode structures. The resultant devices exhibit a detectivity of 10¹ 2 Jones, an external quantum efficiency (EQE) of 33% at 1380 nm, and T 90 operating stability of >19 h under continuous illuminated operation.

Schlagwörter

Stichwörter der Autor:innen

colloidal quantum dotsgroup III‐V semiconductorsindium antimonidephotodetectorshort wave‐infrared

Autor:innen und Institutionen

  • Department of Electrical and Computer Engineering, University of Toronto, 10 King's College Road, Toronto, ON, M5S 3G4, Canada.
  • Department of Chemistry, University of Toronto, 80 St. George Street, Toronto, ON, M5S 3H6, Canada.
  • Department of Materials Science and Engineering, University of Toronto, 184 College Street, Toronto, ON, M5S 3E4, Canada.

ORCID-Profile: Muhammad Imran, Da Bin Kim, Edward H Sargent

Zitieren

APA

Imran, M., Kim, D. B., Xia, P., Villanueva, F. Y., Rehl, B., Pina, J. M., Liu, Y., Zhang, Y., Voznyy, O., Kumacheva, E., Hoogland, S., & Sargent, E. H. (2025). Control Over Metal‐Halide Reactivity Enables Uniform Growth of InSb Colloidal Quantum Dots for Enhanced SWIR Light Detection. Advanced Materials, 37(12). https://doi.org/10.1002/adma.202420273

Vancouver

Imran M, Kim DB, Xia P, Villanueva FY, Rehl B, Pina JM, et al. Control Over Metal‐Halide Reactivity Enables Uniform Growth of InSb Colloidal Quantum Dots for Enhanced SWIR Light Detection. Advanced Materials. 2025;37(12). doi:10.1002/adma.202420273

BibTeX
@article{Imran2025,
  author = {Imran, Muhammad and Kim, Da Bin and Xia, Pan and Villanueva, Francisco Yarur and Rehl, Benjamin and Pina, Joao M and Liu, Yanjiang and Zhang, Yangning and Voznyy, Oleksandr and Kumacheva, Eugenia and Hoogland, Sjoerd and Sargent, Edward H},
  title = {Control Over Metal‐Halide Reactivity Enables Uniform Growth of InSb Colloidal Quantum Dots for Enhanced SWIR Light Detection},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {12},
  doi = {10.1002/adma.202420273}
}
Kostenlos starten →