EUVIMEDEUVIMED entdecken
Übersichtsarbeit

Recent Advances in Scalable, High‐Mass Loaded Electrodes for Grid‐Scale Energy Storage

Makena White, Minseok Choi, Bintao Hu, Swetha Chandrasekaran, Xinzhe Xue, Marcus Worsley, Yat Li, Bruce Dunn iD

Advanced Materials · 2025-11 · 37 (46)

DOI: 10.1002/adma.202417128 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Advanced Materials, online erschienen am 10.03.2025. Verfasst von Makena White und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, University of California, Los Angeles, CA, 90095, USA. Die Arbeit wurde bisher 40-mal zitiert (Crossref) und nennt 65 Literaturangaben. Gefördert von: U.S. Department of Energy, Lawrence Livermore National Laboratory.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing electrification of daily life as well as the intermittent characteristic of renewable energy sources require viable solutions for grid‐scale energy storage. Critical considerations for grid storage applications are electrode mass loading and electrode thickness as these features govern battery pack energy density, an important factor in determining manufacturing costs. For this reason, there is increased interest in finding new ways of creating electrodes with high mass loading. In this review, various high‐mass loading fabrication approaches are considered for positive electrode materials used in batteries. The benchmark used for high mass loading is above 20 mg cm −2 , which is higher than the practical limit of conventional tape‐cast electrodes. Several different electrode approaches are described including templating, laser patterning, direct ink writing, and electrodeposition. A variety of materials are covered with the most prominent being LiFe(PO 4 ) (LFP), LiCoO 2 (LCO), and MnO 2 . In research to date, scalable electrochemical performance has been achieved with mass loadings over 100 mg cm −2 . Areal capacities as high as 14.7 mAh cm −2 at 1.82 mA cm −2 have been achieved in non‐aqueous electrolytes and 9.8 mAh cm −2 at 10 mA cm −2 in aqueous electrolytes. These results establish that the mass loading of electrodes can be scaled up without compromising their electrochemical properties.

Schlagwörter

Stichwörter der Autor:innen

3D printingelectrodepositiongraphene aerogelhigh mass loadingscalability

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, University of California, Los Angeles, CA, 90095, USA.
  • Lawrence Livermore National Laboratory, Livermore, CA, 94550, USA.
  • Department of Chemistry and Biochemistry, University of California, Santa Cruz, CA, 95064, USA.

ORCID-Profile: Bruce Dunn

Förderung

  • U.S. Department of Energy
  • Lawrence Livermore National Laboratory

Zitieren

APA

White, M., Choi, M., Hu, B., Chandrasekaran, S., Xue, X., Worsley, M., Li, Y., & Dunn, B. (2025). Recent Advances in Scalable, High‐Mass Loaded Electrodes for Grid‐Scale Energy Storage. Advanced Materials, 37(46). https://doi.org/10.1002/adma.202417128

Vancouver

White M, Choi M, Hu B, Chandrasekaran S, Xue X, Worsley M, et al. Recent Advances in Scalable, High‐Mass Loaded Electrodes for Grid‐Scale Energy Storage. Advanced Materials. 2025;37(46). doi:10.1002/adma.202417128

BibTeX
@article{White2025,
  author = {White, Makena and Choi, Minseok and Hu, Bintao and Chandrasekaran, Swetha and Xue, Xinzhe and Worsley, Marcus and Li, Yat and Dunn, Bruce},
  title = {Recent Advances in Scalable, High‐Mass Loaded Electrodes for Grid‐Scale Energy Storage},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {46},
  doi = {10.1002/adma.202417128}
}
Kostenlos starten →