EUVIMEDEUVIMED entdecken
Crossref

Linear Dielectric Polymers with Ferroelectric‐Like Crystals for High‐Temperature Capacitive Energy Storage

Jie Chen iD, Chao Wu, Jingyu Deng, Ying Zhou, Fei Liu, Kunming Shi, Pingkai Jiang, Xingyi Huang iD

Advanced Materials · 2025-05 · 37 (19)

DOI: 10.1002/adma.202417072 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 21.01.2025. Verfasst von Jie Chen und 7 weiteren Autor:innen. Beteiligte Einrichtung: Shanghai Key Laboratory of Electrical Insulation and Thermal Ageing, School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Sha…. Die Arbeit wurde bisher 46-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Shanghai Jiao Tong University 2030 Initiative, Natural Science Foundation of Tianiin Municipal science and fechnologycommission.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Achieving optimal capacitive energy storage performance necessitates the integration of high energy storage density, typical of ferroelectric dielectrics, with the low polarization loss associated with linear dielectrics. However, combining these characteristics in a single dielectric material is challenging due to the inherent contradictions between the spontaneous polarization of ferroelectric dielectrics and the adaptability of linear dielectrics to changes in the electric field. To address this issue, a linear isotactic sulfonylated polynorbornene dielectric characterized by ferroelectric‐like crystals has been developed. The sulfonyl dipoles in the ferroelectric‐like crystals are oriented in the same direction, thereby enabling this polymer to exhibit a considerable dielectric constant (7.5) at room temperature. Notably, when the operating temperature surpasses the polymer's glass transition temperature ( T g ≈ 140 °C), its dielectric constant rises to 12 with just minor changes in the dissipation factor. At 150 °C, 90% efficiency of the discharge energy density reaches as high as 6.76 J cm −1 under a low electric field of 320 MV m −1 , which is ten times that of the state‐of‐the‐art, high‐temperature, capacitor‐grade polyetherimide. The enhancement of high‐temperature capacitive performance, achieved by utilizing the crystallinity of isotactic polymers to form a polar structure, presents a new perspective for the design of high‐temperature dielectric polymers.

Schlagwörter

Stichwörter der Autor:innen

dielectric polymerferroelectric‐likehigh‐temperature capacitive energy storage

Autor:innen und Institutionen

  • Shanghai Key Laboratory of Electrical Insulation and Thermal Ageing, School of Chemistry and Chemical Engineering, Shanghai Jiao Tong University, Shanghai, 200240, China.
  • Department of Electrical Engineering, Tsinghua University, Beijing, China.
  • Department of Electrical Engineering, Shanghai Jiao Tong University, Shanghai, 200240, China.

ORCID-Profile: Jie Chen, Xingyi Huang

Förderung

  • National Natural Science Foundation of China
  • Shanghai Jiao Tong University 2030 Initiative
  • Natural Science Foundation of Tianiin Municipal science and fechnologycommission

Zitieren

APA

Chen, J., Wu, C., Deng, J., Zhou, Y., Liu, F., Shi, K., Jiang, P., & Huang, X. (2025). Linear Dielectric Polymers with Ferroelectric‐Like Crystals for High‐Temperature Capacitive Energy Storage. Advanced Materials, 37(19). https://doi.org/10.1002/adma.202417072

Vancouver

Chen J, Wu C, Deng J, Zhou Y, Liu F, Shi K, et al. Linear Dielectric Polymers with Ferroelectric‐Like Crystals for High‐Temperature Capacitive Energy Storage. Advanced Materials. 2025;37(19). doi:10.1002/adma.202417072

BibTeX
@article{Chen2025,
  author = {Chen, Jie and Wu, Chao and Deng, Jingyu and Zhou, Ying and Liu, Fei and Shi, Kunming and Jiang, Pingkai and Huang, Xingyi},
  title = {Linear Dielectric Polymers with Ferroelectric‐Like Crystals for High‐Temperature Capacitive Energy Storage},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {19},
  doi = {10.1002/adma.202417072}
}
Kostenlos starten →