EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High‐Performance Recyclable Polyester Elastomers Through Transient Strain‐Stiffening

Chang Gao iD, Kam C Poon iD, Matilde Concilio iD, Thomas Zinn iD, Georgina L Gregory iD, Charlotte K Williams iD

Advanced Materials · 2025-07 · 37 (27)

DOI: 10.1002/adma.202416674 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 16.04.2025. Verfasst von Chang Gao und 5 weiteren Autor:innen. Beteiligte Einrichtung: Chemistry Research Laboratory, Department of Chemistry, University of Oxford, Oxford, OX1 3TA, United Kingdom. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyester thermoplastic elastomers are promising sustainable materials but their mechanical properties need improvement, in particular, attempts to increase strength often result in compromised elasticity. Strong and tough elastomers are known but require complex polymer formulations together with control over cross‐linking or crystallinity, both of which challenge recycling. Here, the introduction of transient strain‐stiffening approaches into fully amorphous structures show both strengthening and toughening of elastomers while conserving recyclability. The new amorphous block polyester elastomers are prepared by controlled polymerization methods using commercial monomers. The block polymers comprise a central poly(ɛ‐caprolactone‐ co ‐ɛ‐decalactone) block flanked by poly(cyclohexene oxide‐ alt ‐phthalate) blocks. Elastomer thermomechanical properties are tuned by varying ratios of ɛ‐caprolactone to ɛ‐decalactone within the mid‐block to access materials with excellent mechanical properties. The best elastomers feature 30–50 wt.% polycaprolactone and exhibit tensile strengths up to 40 MPa, elongations at break above 2000%, with excellent elastic recovery (>90%). These materials exhibit strain‐induced crystallization and outperform current commercial elastomers, entering a new region of tensile mechanical property space. They have service temperature ranges from −60 to 140 °C and high temperature stability (≥300 °C), with wide thermal (re)processing windows. These new polyester elastomers also show high resistance to creep, humidity resistance, and excellent recyclability.

Schlagwörter

Stichwörter der Autor:innen

block copolymerhigh‐performancemechanical propertiespolycaprolactonepolyestersustainable polymerthermoplastic elastomers

Autor:innen und Institutionen

  • Chemistry Research Laboratory, Department of Chemistry, University of Oxford, Oxford, OX1 3TA, United Kingdom.
  • Diamond Light Source, Harwell Science and Innovation Campus, Didcot, OX11 0DE, United Kingdom.

ORCID-Profile: Chang Gao, Kam C Poon, Matilde Concilio, Thomas Zinn, Georgina L Gregory, Charlotte K Williams

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Gao, C., Poon, K. C., Concilio, M., Zinn, T., Gregory, G. L., & Williams, C. K. (2025). High‐Performance Recyclable Polyester Elastomers Through Transient Strain‐Stiffening. Advanced Materials, 37(27). https://doi.org/10.1002/adma.202416674

Vancouver

Gao C, Poon KC, Concilio M, Zinn T, Gregory GL, Williams CK. High‐Performance Recyclable Polyester Elastomers Through Transient Strain‐Stiffening. Advanced Materials. 2025;37(27). doi:10.1002/adma.202416674

BibTeX
@article{Gao2025,
  author = {Gao, Chang and Poon, Kam C and Concilio, Matilde and Zinn, Thomas and Gregory, Georgina L and Williams, Charlotte K},
  title = {High‐Performance Recyclable Polyester Elastomers Through Transient Strain‐Stiffening},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {27},
  doi = {10.1002/adma.202416674}
}
Kostenlos starten →