EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Coaxial Direct Ink Writing of Cholesteric Liquid Crystal Elastomers in 3D Architectures

Alicia Ng iD, Rodrigo Telles iD, Katherine S Riley iD, Jennifer A Lewis iD, Caitlyn C Cook iD, Elaine Lee iD, Shu Yang iD

Advanced Materials · 2025-03 · 37 (10)

DOI: 10.1002/adma.202416621 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 26.01.2025. Verfasst von Alicia Ng und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, University of Pennsylvania, 3231 Walnut Street, Philadelphia, PA, 19104, USA. Die Arbeit wurde bisher 55-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation, MRSEC, Army Research Office.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cholesteric liquid crystal elastomers (CLCEs) hold great promise for mechanochromic applications in anti‐counterfeiting, smart textiles, and soft robotics, thanks to the structural color and elasticity. While CLCEs are printed via direct ink writing (DIW) to fabricate free‐standing films, complex 3D structures are not fabricated due to the opposing rheological properties necessary for cholesteric alignment and multilayer stacking. Here, 3D CLCE structures are realized by utilizing coaxial DIW to print a CLC ink within a silicone ink. By tailoring the ink compositions, and thus, the rheological properties, the cholesteric phase rapidly forms without an annealing step, while the silicone shell provides encapsulation and support to the CLCE core, allowing for layer‐by‐layer printing of self‐supported 3D structures. As a demonstration, free‐standing bistable thin‐shell domes are printed. Color changes due to compressive and tensile stresses can be witnessed from the top and bottom of the inverted domes, respectively. When the domes are arranged in an array and inverted, they can snap back to their base state by uniaxial stretching, thereby functioning as mechanical sensors with memory. The additive manufacturing platform enables the rapid fabrication of 3D mechanochromic sensors thereby expanding the realm of potential applications for CLCEs.

Schlagwörter

Stichwörter der Autor:innen

3D architecturescholesteric liquid crystal elastomerscore‐shelldirect ink writingmechanochromicpassive sensing

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, University of Pennsylvania, 3231 Walnut Street, Philadelphia, PA, 19104, USA.
  • John A. Paulson School of Engineering and Applied Sciences and Wyss Institute for Biologically Inspired Engineering, Harvard University, Cambridge, MA, 02138, USA.
  • Lawrence Livermore National Laboratory, Livermore, CA, 94550, USA.

ORCID-Profile: Alicia Ng, Rodrigo Telles, Katherine S Riley, Jennifer A Lewis, Caitlyn C Cook, Elaine Lee, Shu Yang

Förderung

  • National Science Foundation
  • MRSEC
  • Army Research Office
  • Lawrence Livermore National Laboratory
  • U.S. Department of Energy
  • Materials Research Science and Engineering Center, Harvard University

Zitieren

APA

Ng, A., Telles, R., Riley, K. S., Lewis, J. A., Cook, C. C., Lee, E., & Yang, S. (2025). Coaxial Direct Ink Writing of Cholesteric Liquid Crystal Elastomers in 3D Architectures. Advanced Materials, 37(10). https://doi.org/10.1002/adma.202416621

Vancouver

Ng A, Telles R, Riley KS, Lewis JA, Cook CC, Lee E, et al. Coaxial Direct Ink Writing of Cholesteric Liquid Crystal Elastomers in 3D Architectures. Advanced Materials. 2025;37(10). doi:10.1002/adma.202416621

BibTeX
@article{Ng2025,
  author = {Ng, Alicia and Telles, Rodrigo and Riley, Katherine S and Lewis, Jennifer A and Cook, Caitlyn C and Lee, Elaine and Yang, Shu},
  title = {Coaxial Direct Ink Writing of Cholesteric Liquid Crystal Elastomers in 3D Architectures},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {10},
  doi = {10.1002/adma.202416621}
}
Kostenlos starten →