Robust Nanoscale Anode Protective Layers toward Fast‐Charge High‐Energy‐Density Lithium Metal Batteries
Advanced Materials · 2025-03 · 37 (11)
DOI: 10.1002/adma.202416377 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 11.02.2025. Verfasst von Chuanfa Li und 9 weiteren Autor:innen. Beteiligte Einrichtung: PCFM Lab, School of Chemistry, Sun Yat-sen University, Guangzhou, 510006, P. R. China. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 74 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China, Natural Science Foundation of Guangdong.
Abstract (Originalsprache)
Mechanically stable and structurally homogeneous lithium–electrolyte interfacial layers are crucial in stabilizing lithium (Li) anodes for practical Li metal batteries. Herein, an ultrathin (≈84 nm) and robust artificial protective layer is constructed with reactive two‐dimensional (2D) molecular brushes as building blocks. The artificial protective layer can in situ react with underlying Li metal to produce a nanoscale poly(lithium styrenesulfonate)‐grafted graphene oxide (GO‐ g ‐PSSLi) layer on the outermost surface and an infinite Li–Ag solid solution in the anode. The nanoscale GO‐ g ‐PSSLi layer well integrates a large number of single Li‐ion conducting PSSLi chains and 2D robust GO backbones, thereby enabling molecular‐level homogeneous and fast Li‐ion diffusion as well as remarkable mechanical strength. Meanwhile, the simultaneously formed Li–Ag solid solution is beneficial for rapid Li transport in the anode to reduce the Li nucleation barrier and facilitate homogeneous deposition of Li. With such artificial protective layers, a prototype pouch cell with a thin Li metal anode (50 µm) and a high‐loading cathode (21.6 mg cm −2 ) delivers an impressive cycle life of over 350 cycles with 69% capacity retention under harsh conditions. Remarkably, ultrahigh charging power density of 456 W kg −1 and energy density of 325 Wh kg −1 can be simultaneously achieved in an Ah‐level pouch cell.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- PCFM Lab, School of Chemistry, Sun Yat-sen University, Guangzhou, 510006, P. R. China.
ORCID-Profile: Shaohong Liu, Dingcai Wu
Förderung
- National Natural Science Foundation of China
- National Key Research and Development Program of China
- Natural Science Foundation of Guangdong
- Fundamental Research Funds for the Central Universities
- Guangdong Basic Research Center of Excellence for Functional Molecular Engineering
- Natural Science Foundation of Guangdong Province
Zitieren
APA
Li, C., Cui, Y., Lin, S., Ma, P., Ji, Y., Cen, Z., Yu, G., Li, S., Liu, S., & Wu, D. (2025). Robust Nanoscale Anode Protective Layers toward Fast‐Charge High‐Energy‐Density Lithium Metal Batteries. Advanced Materials, 37(11). https://doi.org/10.1002/adma.202416377
Vancouver
Li C, Cui Y, Lin S, Ma P, Ji Y, Cen Z, et al. Robust Nanoscale Anode Protective Layers toward Fast‐Charge High‐Energy‐Density Lithium Metal Batteries. Advanced Materials. 2025;37(11). doi:10.1002/adma.202416377
BibTeX
@article{Li2025,
author = {Li, Chuanfa and Cui, Yin and Lin, Shenghao and Ma, Pengwei and Ji, Yiwei and Cen, Zongheng and Yu, Guofang and Li, Shimei and Liu, Shaohong and Wu, Dingcai},
title = {Robust Nanoscale Anode Protective Layers toward Fast‐Charge High‐Energy‐Density Lithium Metal Batteries},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {11},
doi = {10.1002/adma.202416377}
}
EUVIMED