2D AgTiPS 6 : a Cross‐Stacked In‐Plane Anisotropic Semiconductor for Broadband and Polarization‐Sensitive Photodetection
Advanced Materials · 2025-03 · 37 (12)
DOI: 10.1002/adma.202416041 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 10.02.2025. Verfasst von Dong Wu und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Optoelectronic Materials and Technologies, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, Sc…. Die Arbeit wurde bisher 25-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Guangzhou Municipal Science and Technology Project.
Abstract (Originalsprache)
2D anisotropic materials, typically consisting of 1D distorted chains arranged in parallel or anti‐parallel patterns, are gaining attention for their potential in anisotropic electronic and optoelectronic devices. 2D anisotropic materials with cross‐stacked interconnected 1D chains will show improved anisotropy and stability. Nonetheless, to date, no 2D anisotropic materials featuring cross‐stacked motifs have been experimentally realized. This work identifies AgTiPS 6 atomic layers, the 2D in‐plane anisotropic material with cross‐stacked structural motifs, as an n‐type semiconductor with a 1.0 eV band gap. Significantly, the unique cross‐stacked configuration of 2D AgTiPS 6 results in a significant in‐plane anisotropy, with electrical and optoelectrical anisotropies measuring 5.44 and 2.44, respectively, as well as an axially orientation selectivity. Meanwhile, a broadband response from visible (Vis, 405 nm) to middle infrared (MIR, 10.6 µm) is achieved in the AgTiPS 6 ‐based photodetector, with the photoresponse above the bandgap attributed to photothermoelectric effect. Furthermore, 2D AgTiPS 6 has demonstrated environmental stability exceeding 12 months and a laser damage threshold exceeding 10 W cm − 2 , attributed to its extra‐thick monolayer (1.32 nm). This work introduces a novel in‐plane anisotropic material, expanding the repertoire of 2D anisotropic materials and offering potential for the development of anisotropic electronic and optoelectronic devices.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Optoelectronic Materials and Technologies, Guangzhou Key Laboratory of Flexible Electronic Materials and Wearable Devices, School of Materials Science and Engineering, Sun Yat-sen University, Gua…
- State Key Laboratory of Precision Measuring Technology and Instruments, Tianjin University, Tianjin, 300072, P. R. China.
- School of Physics, University of Electronic Science and Technology of China, Chengdu, 610054, P. R. China.
ORCID-Profile: Peng Yu
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Guangzhou Municipal Science and Technology Project
- Basic and Applied Basic Research Foundation of Guangdong Province
Zitieren
APA
Wu, D., Wu, F., Shen, W., Zhou, L., Hu, C., Yu, P., & Yang, G. (2025). 2D AgTiPS 6 : a Cross‐Stacked In‐Plane Anisotropic Semiconductor for Broadband and Polarization‐Sensitive Photodetection. Advanced Materials, 37(12). https://doi.org/10.1002/adma.202416041
Vancouver
Wu D, Wu F, Shen W, Zhou L, Hu C, Yu P, et al. 2D AgTiPS 6 : a Cross‐Stacked In‐Plane Anisotropic Semiconductor for Broadband and Polarization‐Sensitive Photodetection. Advanced Materials. 2025;37(12). doi:10.1002/adma.202416041
BibTeX
@article{Wu2025,
author = {Wu, Dong and Wu, Fafa and Shen, Wanfu and Zhou, Liujiang and Hu, Chunguang and Yu, Peng and Yang, Guowei},
title = {2D AgTiPS 6 : a Cross‐Stacked In‐Plane Anisotropic Semiconductor for Broadband and Polarization‐Sensitive Photodetection},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {12},
doi = {10.1002/adma.202416041}
}
EUVIMED