EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

3D‐Printed Electrohydrodynamic Pump and Development of Anti‐Swelling Organohydrogel for Soft Robotics

Yangyang Xin, Xinran Zhou, Ming Rui Joel Tan, Shaohua Chen, Peiwen Huang, Yawei Jiang, Wenting Wu, Dace Gao, Jian Lv, Shlomo Magdassi, Pooi See Lee iD

Advanced Materials · 2025-02 · 37 (7)

DOI: 10.1002/adma.202415210 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 02.01.2025. Verfasst von Yangyang Xin und 10 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: National Research Foundation (NRF), Prime Minister's Office, Singapore.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study introduces advancements in electrohydrodynamic (EHD) pumps and the development of a 3D‐printable anti‐swelling organohydrogel for soft robotics. Using digital light processing (DLP)technology, precise components with less than 1% size variation are fabricated, enabling a unique manifold pump array. This design achieves an output pressure of 90.2 kPa—18 times higher than traditional configurations—and a flow rate of 800 mL min −1 , surpassing previous EHD pumps. To address swelling issues in dielectric liquids, a novel organohydrogel is developed with Young's modulus of 0.33 MPa, 300% stretchability, and a swelling ratio under 10%. Its low swelling is attributed to the shield effect and edge length confinement effect. This durable material ensures consistent pump performance under mechanical stresses like bending and twisting, crucial for dynamic soft robotic environments. These innovations significantly improve EHD pump efficiency and reliability, expanding their potential applications in soft robotics, bioengineering, and vertical farming.

Schlagwörter

Stichwörter der Autor:innen

3D‐printable organohydrogelanti‐swelling materialsdigital light processing (DLP)electrohydrodynamic (EHD) pumpssoft robotics

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore, 639798, Singapore.
  • Singapore-HUJ Alliance for Research and Enterprise (SHARE), Smart Grippers for Soft Robotics (SGSR)Campus for Research Excellence and Technological Enterprise (CREATE), Singapore, 138602, Singapore.
  • Casali Center for Applied Chemistry, Institute of Chemistry, The Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem, Jerusalem, 9190401, Israel.

ORCID-Profile: Pooi See Lee

Förderung

  • National Research Foundation (NRF), Prime Minister's Office, Singapore

Zitieren

APA

Xin, Y., Zhou, X., Tan, M. R. J., Chen, S., Huang, P., Jiang, Y., Wu, W., Gao, D., Lv, J., Magdassi, S., & Lee, P. S. (2025). 3D‐Printed Electrohydrodynamic Pump and Development of Anti‐Swelling Organohydrogel for Soft Robotics. Advanced Materials, 37(7). https://doi.org/10.1002/adma.202415210

Vancouver

Xin Y, Zhou X, Tan MRJ, Chen S, Huang P, Jiang Y, et al. 3D‐Printed Electrohydrodynamic Pump and Development of Anti‐Swelling Organohydrogel for Soft Robotics. Advanced Materials. 2025;37(7). doi:10.1002/adma.202415210

BibTeX
@article{Xin2025,
  author = {Xin, Yangyang and Zhou, Xinran and Tan, Ming Rui Joel and Chen, Shaohua and Huang, Peiwen and Jiang, Yawei and Wu, Wenting and Gao, Dace and Lv, Jian and Magdassi, Shlomo and Lee, Pooi See},
  title = {3D‐Printed Electrohydrodynamic Pump and Development of Anti‐Swelling Organohydrogel for Soft Robotics},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {7},
  doi = {10.1002/adma.202415210}
}
Kostenlos starten →