Oriented Molecular Dipole‐Enabled Modulation of NiO x /Perovskite Interface for Pb‐Sn Mixed Inorganic Perovskite Solar Cells
Advanced Materials · 2025-02 · 37 (8)
DOI: 10.1002/adma.202414125 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 19.01.2025. Verfasst von Weihai Zhang und 9 weiteren Autor:innen. Beteiligte Einrichtung: School of New Energy, Ningbo University of Technology, Ningbo, 315336, China. Die Arbeit wurde bisher 63-mal zitiert (Crossref) und nennt 51 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Leading talents of Guangdong, Key university laboratory of highly efficient utilization of solar energy and sustainable development of Guangdong.
Abstract (Originalsprache)
Nickel oxide (NiO x ) is considered as a potential hole transport material in the fabrication of lead‐tin (Pb‐Sn) perovskite solar cells (PSCs) for tandem applications. However, the energy level mismatch and unfavorable redox reactions between Ni ≥3+ species and Sn 2+ at the NiO x /perovskite interface pose challenges. Herein, high‐performance Pb‐Sn‐based inorganic PSCs are demonstrated by modulating the NiO x /perovskite interface with a multifunctional 4‐aminobenzenesulfonic acid (4‐ABSA) interlayer. The 4‐ABSA interlayer induces the formation of an oriented dipole moment directed from NiO x to perovskite, effectively elevating the valance band maximum of the NiO x film, thus balancing the energy level difference and promoting charge carrier extraction of the device. Moreover, the 4‐ABSA molecules interact with both NiO x and perovskite, suppressing the reaction of highly active Ni ≥3+ species with perovskites while regulating perovskite crystallization. This results in perovskite films with reduced defect density and enlarged grains. Consequently, a remarkable device efficiency of 17.4% is obtained, representing the highest reported value for Pb‐Sn‐based inorganic PSCs thus far. Furthermore, the 4‐ABSA interlayer enhances the UV‐radiation and operational stability of the resulting devices, maintaining over 80% and 90% of the initial efficiency after 240 h of UV‐light exposure and 480 h of 1 sun illumination, respectively.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of New Energy, Ningbo University of Technology, Ningbo, 315336, China.
- Department of Materials Science and Engineering, Key University Laboratory of Highly Efficient Utilization of Solar Energy and Sustainable Development of Guangdong, Southern University of Science and Technology, Shenzhe…
- Institute of Materials, Henan Academy of Sciences, Zhengzhou, 450046, China.
- Siyuan Laboratory, Guangzhou Key Laboratory of Vacuum Coating Technologies and New Energy Materials, Guangdong Provincial Engineering Technology Research Center of Vacuum Coating Technologies and New Energy Materials, D…
ORCID-Profile: Weihai Zhang, Hsing-Lin Wang
Förderung
- National Key Research and Development Program of China
- Leading talents of Guangdong
- Key university laboratory of highly efficient utilization of solar energy and sustainable development of Guangdong
- National Natural Science Foundation of China
Zitieren
APA
Zhang, W., Liu, H., Huang, T., Kang, L., Ge, J., Li, H., Zhou, X., Zhang, W., Shi, T., & Wang, H. L. (2025). Oriented Molecular Dipole‐Enabled Modulation of NiO x /Perovskite Interface for Pb‐Sn Mixed Inorganic Perovskite Solar Cells. Advanced Materials, 37(8). https://doi.org/10.1002/adma.202414125
Vancouver
Zhang W, Liu H, Huang T, Kang L, Ge J, Li H, et al. Oriented Molecular Dipole‐Enabled Modulation of NiO x /Perovskite Interface for Pb‐Sn Mixed Inorganic Perovskite Solar Cells. Advanced Materials. 2025;37(8). doi:10.1002/adma.202414125
BibTeX
@article{Zhang2025,
author = {Zhang, Weihai and Liu, Heng and Huang, Tengcheng and Kang, Lirui and Ge, Junhan and Li, Hui and Zhou, Xia and Zhang, Wenjun and Shi, Tingting and Wang, Hsing-Lin},
title = {Oriented Molecular Dipole‐Enabled Modulation of NiO x /Perovskite Interface for Pb‐Sn Mixed Inorganic Perovskite Solar Cells},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {8},
doi = {10.1002/adma.202414125}
}
EUVIMED