EUVIMEDEUVIMED entdecken
Crossref

Fabrication of Ultrathin Ferroelectric Al 0.7 Sc 0.3 N Films under Complementary‐Metal‐Oxide‐Semiconductor Compatible Conditions by using HfN 0.4 Electrode

Seung Kyu Ryoo, Kyung Do Kim, Wonho Choi, Panithan Sriboriboon, Seungjae Heo, Haengha Seo, Yoon Ho Jang iD, Jeong Woo Jeon, Min Kyu Yeom, Suk Hyun Lee, Han Sol Park, Yunseok Kim und 1 weitere

Advanced Materials · 2025-01 · 37 (1)

DOI: 10.1002/adma.202413295 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 13.11.2024. Verfasst von Seung Kyu Ryoo und 12 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering and Inter-University Semiconductor Research Center, Seoul National University, Seoul, 08826, South Ko…. Die Arbeit wurde bisher 46-mal zitiert (Crossref) und nennt 38 Literaturangaben. Gefördert von: National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum scandium nitride (AlScN) has emerged as a promising candidate for next‐generation ferroelectric memories, offering a much higher remanent charge density than other materials with a stable ferroelectric phase. However, the inherently high coercive field requires a substantial decrease in film thickness to lower the operating voltage. Significant leakage currents present a severe challenge during the thickness scaling, especially when maintaining compatibility with complementary‐metal‐oxide‐semiconductor (CMOS) fabrication standards. This study adopts a HfN 0.4 bottom electrode, which minimizes lattice mismatch with Al 0.7 Sc 0.3 N (ASN), forming a coherent bottom interface that effectively reduces leakage currents even at thickness < 5 nm. CMOS‐compatible HfN 0.4 /ASN/TiN stack, deposited without vacuum break between each layer, demonstrates exceptional scalability, confirming the ferroelectricity of ASN films at thicknesses down to 3 nm. The coercive voltage is decreased to 4.35 V, significantly advancing low‐voltage AlScN devices that align with CMOS standards.

Schlagwörter

Stichwörter der Autor:innen

aluminum scandium nitride filmbottom interface coherencycomplementary‐metal‐oxide semiconductor compatible fabricationferroelectrichafnium nitridescalability

Autor:innen und Institutionen

  • Department of Materials Science and Engineering and Inter-University Semiconductor Research Center, Seoul National University, Seoul, 08826, South Korea.
  • School of Advanced Materials Science and Engineering, Sungkyunkwan University (SKKU), Suwon, 16419, South Korea.

ORCID-Profile: Yoon Ho Jang

Förderung

  • National Research Foundation of Korea

Zitieren

APA

Ryoo, S. K., Kim, K. D., Choi, W., Sriboriboon, P., Heo, S., Seo, H., Jang, Y. H., Jeon, J. W., Yeom, M. K., Lee, S. H., Park, H. S., Kim, Y., & Hwang, C. S. (2025). Fabrication of Ultrathin Ferroelectric Al 0.7 Sc 0.3 N Films under Complementary‐Metal‐Oxide‐Semiconductor Compatible Conditions by using HfN 0.4 Electrode. Advanced Materials, 37(1). https://doi.org/10.1002/adma.202413295

Vancouver

Ryoo SK, Kim KD, Choi W, Sriboriboon P, Heo S, Seo H, et al. Fabrication of Ultrathin Ferroelectric Al 0.7 Sc 0.3 N Films under Complementary‐Metal‐Oxide‐Semiconductor Compatible Conditions by using HfN 0.4 Electrode. Advanced Materials. 2025;37(1). doi:10.1002/adma.202413295

BibTeX
@article{Ryoo2025,
  author = {Ryoo, Seung Kyu and Kim, Kyung Do and Choi, Wonho and Sriboriboon, Panithan and Heo, Seungjae and Seo, Haengha and Jang, Yoon Ho and Jeon, Jeong Woo and Yeom, Min Kyu and Lee, Suk Hyun and Park, Han Sol and Kim, Yunseok and Hwang, Cheol Seong},
  title = {Fabrication of Ultrathin Ferroelectric Al 0.7 Sc 0.3 N Films under Complementary‐Metal‐Oxide‐Semiconductor Compatible Conditions by using HfN 0.4 Electrode},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {1},
  doi = {10.1002/adma.202413295}
}
Kostenlos starten →