Nickel‐Doped Facet‐Selective Copper Nanowires for Activating CO‐to‐Ethanol Electrosynthesis
Advanced Materials · 2025-01 · 37 (1)
DOI: 10.1002/adma.202413111 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 28.10.2024. Verfasst von Xing Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: National Laboratory of Solid State Microstructures, College of Engineering and Applied Sciences, Jiangsu Key Laboratory of Artificial Functional Mate…. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 63 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Major Research Plan of the National Natural Science Foundation of China.
Abstract (Originalsprache)
Ethanol isa promising energy vector for closing the anthropogenic carbon cycle through reversible electrochemical redox. Currently, ethanol electrosynthesissuffers from low product selectivity due to the competitive advantage of ethylene in CO 2 /CO electroreduction. Here, a facet‐selective metal‐doping strategy is reported, tuning the reaction kinetics of CO reduction paths and thus enhancing the ethanol selectivity. The theoretical calculations reveal that nickel (Ni)doped Cu(100) surface facilitates water dissociation to form adsorbed hydrogen, which promotesselective electrochemical hydrogenation of a key C 2 intermediate ( * CHCOH) toward ethanol path over ethylene path. Experimentally, a solution‐phase synthesis of a Ni‐doped {100}‐dominated Copper nanowires (Cu NWs) catalyst is reported, enabling an ethanol Faradaic efficiency of 56% and a selectivity ratio of ethanol to ethylene of 2.7, which are ≈4 and 15 times larger than those of undoped Cu NWs, respectively. The operando spectroscopic characterizations confirm that Ni‐doping in Cu NWs can alter the interfacial water activity and thus regulate the C 2 product selectivity. With further electrode engineering, a membrane electrode assembly electrolyzer using Ni‐doped Cu NWs catalysts demonstrates an ethanol Faradaic efficiency over 50% at 300 mA cm −2 with a full cell voltage of ≈2.7 V and operates stably for over 300 h.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- National Laboratory of Solid State Microstructures, College of Engineering and Applied Sciences, Jiangsu Key Laboratory of Artificial Functional Materials and Collaborative Innovation Center of Advanced Microstructures,…
- Key Laboratory of Quantum Materials and Devices of Ministry of Education, School of Physics, Southeast University, Nanjing, 211189, China.
ORCID-Profile: Jia Zhu
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Major Research Plan of the National Natural Science Foundation of China
- Excellent Research Program of Nanjing University
- Fundamental Research Funds for the Central Universities
- Carbon Peaking and Carbon Neutrality Science and Technology Innovation Fund of Jiangsu Province
- Basic Research Program of Jiangsu Province
Zitieren
APA
Zhang, X., Ling, C., Ren, S., Xi, H., Ji, L., Wang, J., & Zhu, J. (2025). Nickel‐Doped Facet‐Selective Copper Nanowires for Activating CO‐to‐Ethanol Electrosynthesis. Advanced Materials, 37(1). https://doi.org/10.1002/adma.202413111
Vancouver
Zhang X, Ling C, Ren S, Xi H, Ji L, Wang J, et al. Nickel‐Doped Facet‐Selective Copper Nanowires for Activating CO‐to‐Ethanol Electrosynthesis. Advanced Materials. 2025;37(1). doi:10.1002/adma.202413111
BibTeX
@article{Zhang2025,
author = {Zhang, Xing and Ling, Chongyi and Ren, Siyun and Xi, Hanchen and Ji, Liyao and Wang, Jinlan and Zhu, Jia},
title = {Nickel‐Doped Facet‐Selective Copper Nanowires for Activating CO‐to‐Ethanol Electrosynthesis},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {1},
doi = {10.1002/adma.202413111}
}
EUVIMED