Microwave‐Powered Liquid Metal Degradation of Polyolefins
Advanced Materials · 2025-02 · 37 (6)
DOI: 10.1002/adma.202412539 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 18.12.2024. Verfasst von Jianye Gao und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Biomedical Engineering, Tsinghua University, Beijing, 100084, China. Die Arbeit wurde bisher 29-mal zitiert (Crossref) und nennt 66 Literaturangaben. Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation, National Key R&D Program of China.
Abstract (Originalsprache)
Upcycling waste plastics is highly promising to tackle global white pollution while achieving sustainable development. However, prevailing approaches often encounter challenges in scalable engineering practices due to either insufficient plastic upcycling capability or arduousness in the separation, recovery, and purification of catalysts, which inevitably augments the cost of plastic upcycling. Here, the microwave‐powered liquid metal synergetic depolymerization is presented to facilitate low‐cost plastic upcycling. By leveraging the fluidity of liquid metals and their exceptional chemical‐bond activation ability under microwave field, this method efficiently converts various polyolefins into narrowband hydrocarbon oil (Oil yield: 81 wt.% for polypropylene (PP), 85.9 wt.% for polyethylene (PE)) and high‐value olefin monomers (C 2‐4 selectivity: 50% for PE, 65.3% for PP) over 30 successive cycles, resulting in a high turnover frequency of 2.83 kg Plastic mL Liquid metal −1 . These captivating advantages offered by electromagnetically‐powered liquid metals are also supported by their self‐separation features, thereby paving the way for large‐scale engineering solutions in waste plastic upcycling.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Biomedical Engineering, Tsinghua University, Beijing, 100084, China.
- Key Laboratory of Photochemical Conversion and Optoelectronic Materials & HKU-CAS Joint Laboratory on New Materials, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190, China.
- Key Lab of Cryogenic Science and Technology, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing, 100190, China.
- Hangzhou Yanqu Information Technology Co., Ltd., Hangzhou, 310003, China.
ORCID-Profile: Jing Liu
Förderung
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
- National Key R&D Program of China
- Xinjiang Technical Institute of Physics and Chemistry, Chinese Academy of Sciences
- National Key Research and Development Program of China
Zitieren
APA
Gao, J., Zhao, J., Xing, Z., Guo, M., Xie, H., Ma, W., & Liu, J. (2025). Microwave‐Powered Liquid Metal Degradation of Polyolefins. Advanced Materials, 37(6). https://doi.org/10.1002/adma.202412539
Vancouver
Gao J, Zhao J, Xing Z, Guo M, Xie H, Ma W, et al. Microwave‐Powered Liquid Metal Degradation of Polyolefins. Advanced Materials. 2025;37(6). doi:10.1002/adma.202412539
BibTeX
@article{Gao2025,
author = {Gao, Jianye and Zhao, Jun and Xing, Zerong and Guo, Minghui and Xie, Haijiao and Ma, Wangjing and Liu, Jing},
title = {Microwave‐Powered Liquid Metal Degradation of Polyolefins},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {6},
doi = {10.1002/adma.202412539}
}
EUVIMED