Multiscale Manufacturing of Recyclable Polyimide Composite Aerogels
Advanced Materials · 2025-02 · 37 (5)
DOI: 10.1002/adma.202411599 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 13.11.2024. Verfasst von Mengmeng Li und 12 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory for Building Energy Materials and Components, Swiss Federal Laboratories for Materials Science and Technology, Empa, Überlandstrasse 129, …. Die Arbeit wurde bisher 35-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: COST Action CA18125 "Advanced Engineering and Research of aeroGels for Environment and Life Sciences" (AERoGELS), COST Innovators, European Commission.
Abstract (Originalsprache)
Mitigating embodied emissions is becoming increasingly crucial as the energy supply shifts toward more sustainable sources. Bio‐based materials present a potentially more sustainable alternative to synthetic polymers; however, it often do not yet match the performance of synthetic materials. Given the ongoing reliance on high‐performance, high‐environmental‐impact materials, it is essential to ensure their complete recyclability. Aerogels, recognized by IUPAC as one of the top ten emerging technologies, are witnessing rapid market growth in thermal insulation and thermal protection applications. In certain applications, synthetic and composite aerogels exhibit superior performance, particularly under high temperatures. Here, molecular simulation tools are employed to elucidate the interaction forces between polymers and solvents, develop a recycling strategy for polyimide‐based aerogels, and demonstrate their application in thermal protection for firefighter textiles and thermal runaway protection for Li‐ion battery packs. These composites are engineered for disassembly, allowing for the complete recovery of starting materials without any degradation of components after multiple recycling cycles. The recyclable composites can be fabricated using various manufacturing techniques to produce fibers (1D), membranes (2D), and complex structures (3D). This unique combination of outstanding performance and excellent recyclability facilitates the sustainable utilization of aerogels in protective clothing, electric mobility, consumer goods, and aeronautics.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratory for Building Energy Materials and Components, Swiss Federal Laboratories for Materials Science and Technology, Empa, Überlandstrasse 129, Dübendorf, 8600, Switzerland.
- College of Materials Science and Engineering, Donghua University, Shanghai, 201620, P. R. China.
- Institute of Sustainability for Chemicals, Energy and Environment (ISCE2), Agency for Science, Technology, and Research (A*STAR), 1 Pesek Road Jurong, Island, 627833, Singapore.
- State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing, 100084, China.
- National Engineering Research Center of Electric Vehicles, Beijing Institute of Technology, Beijing, Beijing, 100081, China.
- Center for X-ray Analytics, Swiss Federal Laboratories for Materials Science and Technology, Empa, Dübendorf, 8600, Switzerland.
ORCID-Profile: Shanyu Zhao
Förderung
- COST Action CA18125 "Advanced Engineering and Research of aeroGels for Environment and Life Sciences" (AERoGELS)
- COST Innovators
- European Commission
- Horizon 2020
- Horizon 2020 Framework Programme
Zitieren
APA
Li, M., Wu, T., Zhao, Z., Li, L., Shan, T., Wu, H., Zboray, R., Bernasconi, F., Cui, Y., Hu, P., Malfait, W. J., Zhang, Q., & Zhao, S. (2025). Multiscale Manufacturing of Recyclable Polyimide Composite Aerogels. Advanced Materials, 37(5). https://doi.org/10.1002/adma.202411599
Vancouver
Li M, Wu T, Zhao Z, Li L, Shan T, Wu H, et al. Multiscale Manufacturing of Recyclable Polyimide Composite Aerogels. Advanced Materials. 2025;37(5). doi:10.1002/adma.202411599
BibTeX
@article{Li2025,
author = {Li, Mengmeng and Wu, Tingting and Zhao, Zhiyang and Li, Lei and Shan, Tongxin and Wu, Hui and Zboray, Robert and Bernasconi, Francesco and Cui, Yongjie and Hu, Peiying and Malfait, Wim J and Zhang, Qinghua and Zhao, Shanyu},
title = {Multiscale Manufacturing of Recyclable Polyimide Composite Aerogels},
journal = {Advanced Materials},
year = {2025},
volume = {37},
number = {5},
doi = {10.1002/adma.202411599}
}
EUVIMED