EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY-NC 4.0

From Printed Devices to Vertically Stacked, 3D Flexible Hybrid Systems

Fengyuan Liu, Adamos Christou, Abhishek Singh Dahiya, Ravinder Dahiya iD

Advanced Materials · 2025-03 · 37 (10)

DOI: 10.1002/adma.202411151 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Advanced Materials, online erschienen am 29.01.2025. Verfasst von Fengyuan Liu und 3 weiteren Autor:innen. Beteiligte Einrichtung: Bendable Electronics and Sustainable Technologies (BEST) Group, Department of Electrical and Computer Engineering, Northeastern University, Boston, M…. Die Arbeit wurde bisher 44-mal zitiert (Crossref) und nennt 263 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: H2020 Marie Skłodowska-Curie Actions.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The pursuit of miniaturized Si electronics has revolutionized computing and communication. During recent years, the value addition in electronics has also been achieved through printing, flexible and stretchable electronics form factors, and integration over areas larger than wafer size. Unlike Si semiconductor manufacturing which takes months from tape‐out to wafer production, printed electronics offers greater flexibility and fast‐prototyping capabilities with lesser resources and waste generation. While significant advances have been made with various types of printed sensors and other passive devices, printed circuits still lag behind Si‐based electronics in terms of performance, integration density, and functionality. In this regard, recent advances using high‐resolution printing coupled with the use of high mobility materials and device engineering, for both in‐plane and out‐of‐plane integration, raise hopes. This paper focuses on the progress in printed electronics, highlighting emerging printing technologies and related aspects such as resource efficiency, environmental impact, integration scale, and the novel functionalities enabled by vertical integration of printed electronics. By highlighting these advances, this paper intends to reveal the future promise of printed electronics as a sustainable and resource‐efficient route for realizing high‐performance integrated circuits and systems.

Schlagwörter

Stichwörter der Autor:innen

3D integrationgreen manufacturingheterogeneous integrationprinted and flexible electronicsresource efficiency

Autor:innen und Institutionen

  • Bendable Electronics and Sustainable Technologies (BEST) Group, Department of Electrical and Computer Engineering, Northeastern University, Boston, MA, 02115, USA.
  • Microsystems Technology Unit, Centre for Sensors & Devices, Fondazione Bruno Kessler (FBK), Via Sommarive, 18, Trento, 38123, Italy.

ORCID-Profile: Ravinder Dahiya

Förderung

  • H2020 Marie Skłodowska-Curie Actions

Zitieren

APA

Liu, F., Christou, A., Dahiya, A. S., & Dahiya, R. (2025). From Printed Devices to Vertically Stacked, 3D Flexible Hybrid Systems. Advanced Materials, 37(10). https://doi.org/10.1002/adma.202411151

Vancouver

Liu F, Christou A, Dahiya AS, Dahiya R. From Printed Devices to Vertically Stacked, 3D Flexible Hybrid Systems. Advanced Materials. 2025;37(10). doi:10.1002/adma.202411151

BibTeX
@article{Liu2025,
  author = {Liu, Fengyuan and Christou, Adamos and Dahiya, Abhishek Singh and Dahiya, Ravinder},
  title = {From Printed Devices to Vertically Stacked, 3D Flexible Hybrid Systems},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {10},
  doi = {10.1002/adma.202411151}
}
Kostenlos starten →