EUVIMEDEUVIMED entdecken
Crossref

Sustainable Lithography Paradigm Enabled by Mechanically Peelable Resists

Lei Chen, Huikang Liang, Peng Liu, Cuihong Liu, Bo Feng, Zhiwen Shu, Yiqin Chen, Xiaoqian Dong, Jianfei Xie, Ming Ji, Huigao Duan iD

Advanced Materials · 2025-01 · 37 (3)

DOI: 10.1002/adma.202410978 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 26.11.2024. Verfasst von Lei Chen und 10 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Vehicle Engineering, Hunan University, Changsha, 410082, P. R. China. Die Arbeit wurde bisher 23-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, The Institutional Review Board of the Third Xiangya Hospital of Central South University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithography is critical in micro‐ and nanofabrication processes, enabling the development of integrated circuits, semiconductor devices, and various advanced electronic and photonic systems. However, there are challenges related to sustainability, efficiency, and yield, as well as compatibility with transient electronics. This work introduces a sustainable lithography paradigm employing mechanically peelable resists compatible with existing cleanroom processes. The resists exhibit near‐zero adhesion to various substrates, facilitating efficient, cost‐effective, environmentally friendly, and chemical‐free mechanical stripping without observable particulate residues. The mechanical lift‐off process enables scalable and 100%‐yield pattern transfer using commercially available tape within seconds. Furthermore, the new paradigm supports distributed and in situ conformal manufacturing using the peelable resist as a “transferable stencil mask” to fabricate various functional devices on flexible and nonplanar surfaces, as well as ultra‐thin biodegradable substrates. Overall, this work expands the potential for using lift‐off as a standard process in the pan‐semiconductor industry and opens new avenues for lithographic procedures aimed at the reliable mass production of transient electronics and integrated biodegradable devices, addressing growing sustainability issues caused by electronic waste.

Schlagwörter

Stichwörter der Autor:innen

chemical‐freeconformal manufacturingmechanically peelable resistssustainable lithographytransient electronics

Autor:innen und Institutionen

  • College of Mechanical and Vehicle Engineering, Hunan University, Changsha, 410082, P. R. China.
  • Greater Bay Area Institute for Innovation, Hunan University, Guangzhou, 511300, P. R. China.
  • School of Mechanical Engineering, Hunan University of Science and Technology, Xiangtan, 411201, P. R. China.
  • Nursing Department, The Third Xiangya Hospital, Central South University, Changsha, 410000, P. R. China.
  • IBD Technology Co., Ltd., Zhongshan, 528400, P. R. China.

ORCID-Profile: Huigao Duan

Förderung

  • National Key Research and Development Program of China
  • National Natural Science Foundation of China
  • The Institutional Review Board of the Third Xiangya Hospital of Central South University

Zitieren

APA

Chen, L., Liang, H., Liu, P., Liu, C., Feng, B., Shu, Z., Chen, Y., Dong, X., Xie, J., Ji, M., & Duan, H. (2025). Sustainable Lithography Paradigm Enabled by Mechanically Peelable Resists. Advanced Materials, 37(3). https://doi.org/10.1002/adma.202410978

Vancouver

Chen L, Liang H, Liu P, Liu C, Feng B, Shu Z, et al. Sustainable Lithography Paradigm Enabled by Mechanically Peelable Resists. Advanced Materials. 2025;37(3). doi:10.1002/adma.202410978

BibTeX
@article{Chen2025,
  author = {Chen, Lei and Liang, Huikang and Liu, Peng and Liu, Cuihong and Feng, Bo and Shu, Zhiwen and Chen, Yiqin and Dong, Xiaoqian and Xie, Jianfei and Ji, Ming and Duan, Huigao},
  title = {Sustainable Lithography Paradigm Enabled by Mechanically Peelable Resists},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {3},
  doi = {10.1002/adma.202410978}
}
Kostenlos starten →