EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Xolography for Biomedical Applications: Dual‐Color Light‐Sheet Printing of Hydrogels With Local Control Over Shape and Stiffness

Lena Stoecker iD, Gerardo Cedillo-Servin iD, Niklas F König iD, Freek V de Graaf iD, Marcela García-Jiménez iD, Sandra Hofmann iD, Keita Ito iD, Annelieke S Wentzel iD, Miguel Castilho iD

Advanced Materials · 2025

DOI: 10.1002/adma.202410292 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, 2025. Verfasst von Lena Stoecker und 8 weiteren Autor:innen. Beteiligte Einrichtung: Orthopaedic Biomechanics, Department of Biomedical Engineering, Eindhoven University of Technology, P.O. Box 513, Eindhoven, 5600 MB, the Netherlands. Hauptthemen laut MEDLINE: Hydrogels, Printing, Three-Dimensional, Light. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: EU Horizon 2020 program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Current challenges in tissue engineering include creation of extracellular environments that support and interact with cells using biochemical, mechanical, and structural cues. Spatial control over these cues is currently limited due to a lack of suitable fabrication techniques. This study introduces Xolography, an emerging dual‐color light‐sheet volumetric printing technology, to achieve control over structural and mechanical features for hydrogel‐based photoresins at micro‐ to macroscale while printing within minutes. A water‐soluble photoswitch photoinitiator system and a library of naturally‐derived, synthetic, and thermoresponsive hydrogels for Xolography are proposed. Centimeter‐scale, 3D constructs with positive features of 20 µm and negative features of ≈100 µm are fabricated with control over mechanical properties (compressive moduli 0.2 kPa–6.5 MPa). Notably, switching from binary to grayscaled light projection enables spatial control over stiffness (0.2–16 kPa). As a proof of concept, grayscaled Xolography is leveraged with thermoresponsive hydrogels to introduce reversible anisotropic shape changes beyond isometric shrinkage. Xolography of viable cell aggregates is finally demonstrated, laying the foundation for cell‐laden printing of dynamic, cell‐instructive environments with tunable structural and mechanical cues in a fast one‐step process. Overall, these innovations unlock unique possibilities of Xolography across multiple biomedical applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

HydrogelsPrinting, Three-DimensionalLightTissue EngineeringHumansAnimalsColorBiocompatible MaterialsMiceTemperature

Stichwörter der Autor:innen

bioprintinggrayscalestiffness controlthermoresponsivevolumetric 3D printing

Substanzen

HydrogelsBiocompatible Materials

Autor:innen und Institutionen

  • Orthopaedic Biomechanics, Department of Biomedical Engineering, Eindhoven University of Technology, P.O. Box 513, Eindhoven, 5600 MB, the Netherlands.
  • Institute for Complex Molecular Systems (ICMS), Eindhoven University of Technology, P.O. Box 513, Eindhoven, 5600 MB, the Netherlands.
  • Department of Orthopedics, Regenerative Medicine Center Utrecht, University Medical Center Utrecht, Utrecht, 3584 CX, the Netherlands.
  • xolo GmbH, Volmerstraße 9B, 12489, Berlin, Germany.
  • Macromolecular and Organic Chemistry, Department of Chemical Engineering and Chemistry, Eindhoven University of Technology, P.O. Box 513, Eindhoven, 5600 MB, the Netherlands.

ORCID-Profile: Lena Stoecker, Gerardo Cedillo-Servin, Niklas F König, Freek V de Graaf, Marcela García-Jiménez, Sandra Hofmann, Keita Ito, Annelieke S Wentzel, Miguel Castilho

Förderung

  • EU Horizon 2020 program

Zitieren

APA

Stoecker, L., Cedillo-Servin, G., König, N. F., de Graaf, F. V., García-Jiménez, M., Hofmann, S., Ito, K., Wentzel, A. S., & Castilho, M. (2025). Xolography for Biomedical Applications: Dual‐Color Light‐Sheet Printing of Hydrogels With Local Control Over Shape and Stiffness. Advanced Materials. https://doi.org/10.1002/adma.202410292

Vancouver

Stoecker L, Cedillo-Servin G, König NF, de Graaf FV, García-Jiménez M, Hofmann S, et al. Xolography for Biomedical Applications: Dual‐Color Light‐Sheet Printing of Hydrogels With Local Control Over Shape and Stiffness. Advanced Materials. 2025. doi:10.1002/adma.202410292

BibTeX
@article{Stoecker2025,
  author = {Stoecker, Lena and Cedillo-Servin, Gerardo and König, Niklas F and de Graaf, Freek V and García-Jiménez, Marcela and Hofmann, Sandra and Ito, Keita and Wentzel, Annelieke S and Castilho, Miguel},
  title = {Xolography for Biomedical Applications: Dual‐Color Light‐Sheet Printing of Hydrogels With Local Control Over Shape and Stiffness},
  journal = {Advanced Materials},
  year = {2025},
  doi = {10.1002/adma.202410292}
}
Kostenlos starten →