Multisite Crosslinked Poly(ether‐urethane)‐Based Polymer Electrolytes for High‐Voltage Solid‐State Lithium Metal Batteries
Advanced Materials · 2024-12 · 36 (49)
DOI: 10.1002/adma.202409269 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 24.10.2024. Verfasst von Fei Pei und 13 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Materials Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science …. Die Arbeit wurde bisher 113-mal zitiert (Crossref) und nennt 52 Literaturangaben. Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation.
Abstract (Originalsprache)
Utilizing solid‐state polymer electrolytes (SPEs) in high‐voltage Li‐metal batteries is a promising strategy for achieving high energy density and safety. However, the SPEs face the challenges such as undesirable mechanical strength, low ionic conductivity and incompatible high‐voltage interface. Here, a novel crosslinked poly(ether‐urethane)‐based SPE with a molecular cross‐linked structure is fabricated to create high‐throughput Li + transport pathway. The amino‐modified Zr‐porphyrin‐based metal‐organic frameworks (ZrMOF) are introduced as multisite cross‐linking nodes and polymer chain extenders. The abundant ether/ketonic‐oxygen and Lewis acid sites in the SPE achieve high Li + conductivity (5.7 × 10 −4 S cm −1 at 30 °C) and Li + transference number (0.84). The interpenetrating cross‐linked structure of SPE with robust mechanical strength results in a record cycle life of 8000 h in Li||Li symmetric cell. The high structural stability of ZrMOF and abundant electron‐withdrawing urethane/ureido groups in the SPE with high oxidation potential (5.1 V) enables a discharge capacity of 182 mAh g −1 at 0.3 C over 500 cycles in a LiNi 0.8 Co 0.1 Mn 0.1 O 2 ||Li cell. Remarkably, a high energy density of 446 Wh kg −1 in a 1.5‐Ah pouch cell is obtained with high loading cathode (≈4 mAh cm −2 ), demonstrating a great prospect of the current SPE for practical application in solid‐state, high‐voltage Li‐metal batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- State Key Laboratory of Materials Processing and Die & Mould Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan, 430074, China.
- Department of Nuclear Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA.
- Sun, State Key Laboratory of Physical Chemistry of Solid Surfaces, Collaborative Innovation Center of Chemistry for Energy Materials (iChEM), College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, 361…
ORCID-Profile: Fei Pei, Yunhui Huang
Förderung
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
Zitieren
APA
Pei, F., Huang, Y., Wu, L., Zhou, S., Kang, Q., Lin, W., Liao, Y., Zhang, Y., Huang, K., Shen, Y., Yuan, L., Sun, S. G., Li, Z., & Huang, Y. (2024). Multisite Crosslinked Poly(ether‐urethane)‐Based Polymer Electrolytes for High‐Voltage Solid‐State Lithium Metal Batteries. Advanced Materials, 36(49). https://doi.org/10.1002/adma.202409269
Vancouver
Pei F, Huang Y, Wu L, Zhou S, Kang Q, Lin W, et al. Multisite Crosslinked Poly(ether‐urethane)‐Based Polymer Electrolytes for High‐Voltage Solid‐State Lithium Metal Batteries. Advanced Materials. 2024;36(49). doi:10.1002/adma.202409269
BibTeX
@article{Pei2024,
author = {Pei, Fei and Huang, Yimeng and Wu, Lin and Zhou, Shiyuan and Kang, Qi and Lin, Wenjie and Liao, Yaqi and Zhang, Yi and Huang, Kai and Shen, Yue and Yuan, Lixia and Sun, Shi-Gang and Li, Zhen and Huang, Yunhui},
title = {Multisite Crosslinked Poly(ether‐urethane)‐Based Polymer Electrolytes for High‐Voltage Solid‐State Lithium Metal Batteries},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {49},
doi = {10.1002/adma.202409269}
}
EUVIMED