EUVIMEDEUVIMED entdecken
Crossref

Non‐Interleaved Shared‐Aperture Full‐Stokes Metalens via Prior‐Knowledge‐Driven Inverse Design

Yuzhong Wang, Yifei Wang, Axiang Yu, Mingshuang Hu, Qiming Wang, Cheng Pang, Huimin Xiong, Yayun Cheng, Jiaran Qi iD

Advanced Materials · 2025-02 · 37 (8)

DOI: 10.1002/adma.202408978 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 25.11.2024. Verfasst von Yuzhong Wang und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Microwave Engineering, School of Electronics and Information Engineering, Harbin Institute of Technology, Harbin, 150001, China. Die Arbeit wurde bisher 98-mal zitiert (Crossref) und nennt 57 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Heilongjiang Province, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Characterization of electromagnetic wave polarization states is critical in various applications of materials, biomedical, and imaging. The emergence of metasurfaces opens up the possibility of implementing highly integrated full‐Stokes imagers. Despite rapid development, prevailing schemes on metasurface‐based full‐Stokes imagers require interleaved or cascaded designs, inevitably resulting in performance deterioration, bulky size, and complicating the imaging procedure due to misalignment. To overcome these challenges, a non‐interleaved shared‐aperture full‐Stokes metalens enabled by the prior‐knowledge‐driven inverse design methodology is proposed. The metalens can be directly deployed into imagers, performing high‐accuracy diffraction‐limited full‐Stokes imaging without other ancillary components, breaking intrinsic constraints of efficiency and resolution in interleaved design. To demonstrate this, the metalens is integrated into the W‐band passive imaging system, as an alternative solution, to perform polarimetric imaging, which reduces the reliance on the high cost and high complexity of the ortho‐mode transducer and broadband correlator in traditional polarimetric radiometers. Furthermore, with the assistance of a 3D reconstruction method, the feasibility of multi‐polarization information for contactless surface slope measurements is explored. This work may open new paradigms for the full‐Stokes imager designing and broaden the applications of metasurface polarimetric imaging.

Schlagwörter

Stichwörter der Autor:innen

contactless surface slope measurementfull‐stokes imagerinverse designpolarization imaging

Autor:innen und Institutionen

  • Department of Microwave Engineering, School of Electronics and Information Engineering, Harbin Institute of Technology, Harbin, 150001, China.

ORCID-Profile: Jiaran Qi

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Heilongjiang Province
  • Fundamental Research Funds for the Central Universities
  • Heilong Jiang Postdoctoral Funds for scientific research

Zitieren

APA

Wang, Y., Wang, Y., Yu, A., Hu, M., Wang, Q., Pang, C., Xiong, H., Cheng, Y., & Qi, J. (2025). Non‐Interleaved Shared‐Aperture Full‐Stokes Metalens via Prior‐Knowledge‐Driven Inverse Design. Advanced Materials, 37(8). https://doi.org/10.1002/adma.202408978

Vancouver

Wang Y, Wang Y, Yu A, Hu M, Wang Q, Pang C, et al. Non‐Interleaved Shared‐Aperture Full‐Stokes Metalens via Prior‐Knowledge‐Driven Inverse Design. Advanced Materials. 2025;37(8). doi:10.1002/adma.202408978

BibTeX
@article{Wang2025,
  author = {Wang, Yuzhong and Wang, Yifei and Yu, Axiang and Hu, Mingshuang and Wang, Qiming and Pang, Cheng and Xiong, Huimin and Cheng, Yayun and Qi, Jiaran},
  title = {Non‐Interleaved Shared‐Aperture Full‐Stokes Metalens via Prior‐Knowledge‐Driven Inverse Design},
  journal = {Advanced Materials},
  year = {2025},
  volume = {37},
  number = {8},
  doi = {10.1002/adma.202408978}
}
Kostenlos starten →