EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Role of Hydrogen in ReRAM

Horatio R J Cox iD, Matthew K Sharpe iD, Callum McAleese iD, Mikko Laitinen iD, Jeevan Dulai, Richard Smith, Jonathan England, Wing H Ng, Mark Buckwell iD, Longfei Zhao, Sarah Fearn iD, Adnan Mehonic iD und 1 weitere

Advanced Materials · 2024-12 · 36 (52)

DOI: 10.1002/adma.202408437 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 14.10.2024. Verfasst von Horatio R J Cox und 12 weiteren Autor:innen. Beteiligte Einrichtung: Department of Electronic and Electrical Engineering, University College London, Torrington Place, London, WC1E 7JE, UK. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Previous research on transistor gate oxides reveals a clear link between hydrogen content and oxide breakdown. This has implications for redox‐based resistive random access memory (ReRAM) devices, which exploit soft, reversible, dielectric breakdown, as hydrogen is often not considered in modeling or measured experimentally. Here quantitative measurements, corroborated across multiple techniques are reported, that reveal ReRAM devices, whether manufactured in a university setting or research foundry, contain concentrations of hydrogen at levels likely to impact resistance switching behavior. To the knowledge this is the first empirical measurement depth profiling hydrogen concentration through a ReRAM device. Applying a recently‐developed Secondary Ion Mass Spectrometry analysis technique enables to measure hydrogen diffusion across the interfaces of SiO x ReRAM devices as a result of operation. These techniques can be applied to a broad range of devices to further understand ReRAM operation. Careful control of temperatures, precursors, and exposure to ambient during fabrication should limit hydrogen concentration. Additionally, using thin oxynitride or TiO 2 capping layers should prevent diffusion of hydrogen and other contaminants into devices during operation. Applying these principles to ReRAM devices will enable considerable, informed, improvements in performance.

Schlagwörter

Stichwörter der Autor:innen

ReRAMToF‐ERDAdefectshydrogenmemristor

Autor:innen und Institutionen

  • Department of Electronic and Electrical Engineering, University College London, Torrington Place, London, WC1E 7JE, UK.
  • Ion Beam Centre, Advanced Technology Institute, University of Surrey, UK, Guildford, GU2 7XH, UK.
  • Department of Physics, University of Jyväskylä, P.O. Box 35, Jyväskylä, FI-40014, Finland.
  • Department of Chemical Engineering, University College London, Torrington Place, London, WC1E 7JE, UK.
  • Department of Materials, Imperial College London, South Kensington Campus, London, SW7 2AZ, UK.

ORCID-Profile: Horatio R J Cox, Matthew K Sharpe, Callum McAleese, Mikko Laitinen, Mark Buckwell, Sarah Fearn, Adnan Mehonic, Anthony J Kenyon

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Cox, H. R. J., Sharpe, M. K., McAleese, C., Laitinen, M., Dulai, J., Smith, R., England, J., Ng, W. H., Buckwell, M., Zhao, L., Fearn, S., Mehonic, A., & Kenyon, A. J. (2024). The Role of Hydrogen in ReRAM. Advanced Materials, 36(52). https://doi.org/10.1002/adma.202408437

Vancouver

Cox HRJ, Sharpe MK, McAleese C, Laitinen M, Dulai J, Smith R, et al. The Role of Hydrogen in ReRAM. Advanced Materials. 2024;36(52). doi:10.1002/adma.202408437

BibTeX
@article{Cox2024,
  author = {Cox, Horatio R J and Sharpe, Matthew K and McAleese, Callum and Laitinen, Mikko and Dulai, Jeevan and Smith, Richard and England, Jonathan and Ng, Wing H and Buckwell, Mark and Zhao, Longfei and Fearn, Sarah and Mehonic, Adnan and Kenyon, Anthony J},
  title = {The Role of Hydrogen in ReRAM},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {52},
  doi = {10.1002/adma.202408437}
}
Kostenlos starten →