Uncovering the Intrinsic High Fracture Toughness of Titanium via Lowered Oxygen Impurity Content
Advanced Materials · 2024-10 · 36 (40)
DOI: 10.1002/adma.202408286 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 26.08.2024. Verfasst von Xiao-Wei Zou und 2 weiteren Autor:innen. Beteiligte Einrichtung: Center for Advancing Materials Performance from the Nanoscale, State Key Laboratory for Mechanical Behaviour of Materials, Xi'an Jiaotong University,…. Die Arbeit wurde bisher 49-mal zitiert (Crossref) und nennt 47 Literaturangaben. Gefördert von: National Outstanding Youth Science Fund Project of National Natural Science Foundation of China.
Abstract (Originalsprache)
Titanium (Ti) and its alloys are known to exhibit room‐temperature fracture toughness below 130 MPa m 1/2 , only about one half of the best austenitic stainless steels. It is purported that this is not the best possible fracture resistance of Ti, but a result of oxygen impurities that sensitively retard the activities of plasticity carriers in this hexagonal close‐packed metal. By a reduction of oxygen content from the 0.14 wt% in commercial purity Ti to 0.02 wt%, the mode‐Ι fracture toughness of the low‐oxygen Ti is measured to be as high as K J Ic ≈ 255 MPa m 1/2 , corresponding to J ‐integral‐based crack‐initiation toughness of up to J Ic ≈ 537 kJ m −2 . This extraordinary toughness, reported here for the first time for pure Ti, places Ti among the toughest known materials. The intrinsic high fracture resistance is attributed to the profuse plastic deformation in a significantly enlarged plastic zone, rendered by the pronounced deformation twinning ahead of the crack tip along with ample twin‐stimulated 〈 c + a 〉 dislocation activities, in the absence of impeding oxygen. Controlling the content of a property‐controlling impurity thus holds the promise to be a readily applicable strategy to reach for unprecedented damage tolerance in some other structural alloys.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Center for Advancing Materials Performance from the Nanoscale, State Key Laboratory for Mechanical Behaviour of Materials, Xi'an Jiaotong University, Xi'an, 710049, P. R. China.
- Center for Alloy Innovation and Design, State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an, 710049, P. R. China.
ORCID-Profile: Wei-Zhong Han
Förderung
- National Outstanding Youth Science Fund Project of National Natural Science Foundation of China
Zitieren
APA
Zou, X. W., Han, W. Z., & Ma, E. (2024). Uncovering the Intrinsic High Fracture Toughness of Titanium via Lowered Oxygen Impurity Content. Advanced Materials, 36(40). https://doi.org/10.1002/adma.202408286
Vancouver
Zou XW, Han WZ, Ma E. Uncovering the Intrinsic High Fracture Toughness of Titanium via Lowered Oxygen Impurity Content. Advanced Materials. 2024;36(40). doi:10.1002/adma.202408286
BibTeX
@article{Zou2024,
author = {Zou, Xiao-Wei and Han, Wei-Zhong and Ma, En},
title = {Uncovering the Intrinsic High Fracture Toughness of Titanium via Lowered Oxygen Impurity Content},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {40},
doi = {10.1002/adma.202408286}
}
EUVIMED