EUVIMEDEUVIMED entdecken
Crossref

4.6 V Moisture‐Tolerant Electrolytes for Lithium‐Ion Batteries

Nan Zhang iD, Ai-Min Li, Weiran Zhang, Zeyi Wang, Yijie Liu, Xiyue Zhang iD, Guorui Cai, Hongli Wan, Jijian Xu iD, Chunsheng Wang iD

Advanced Materials · 2024-12 · 36 (50)

DOI: 10.1002/adma.202408039 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 22.10.2024. Verfasst von Nan Zhang und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biomolecular Engineering, University of Maryland, College Park, MD, 20742, USA. Die Arbeit wurde bisher 51-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: Basic Energy Sciences.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Commercial LiPF 6 ‐based electrolytes face limitations in oxidation stability (4.2 V) and water tolerance (10 ppm). While replacing LiPF 6 with lithium bis(trifluoromethane)sulfonimide (LiTFSI) improves water tolerance, it induces Al current collector corrosion above 3.7 V vs. Li/Li + . To address this, lithium cyano(trifluoromethanesulfonyl)imide (LiCTFSI) is proposed here as a non‐corrosive, moisture‐tolerant alternative. The 2.0 M LiCTFSI/propylene carbonate (PC)‐fluoroethylene carbonate (FEC) (7:3 by volume) electrolyte enables LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathodes to reach 210 mAh g −1 (2.8‐4.6 V) with a cycle life of 500. Full cells with NCM811||graphite (2.0 mAh cm −2 ) show 77.8% capacity retention after 500 cycles. Even with 2000 ppm moisture in the electrolyte, full cells maintain high cycling stability, reducing the need for costly dry rooms. The electrolyte’s low freezing point and high thermal stability enable the operation from ‐20 °C to 60 °C, delivering 168 mAh g −1 at ‐20 °C and retaining 94% capacity after 100 cycles at 60 °C. In contrast, cells with commercial LiPF 6 electrolyte deliver 71 mAh g −1 at ‐20°C and retain 52.7% after 100 cycles at 60 °C. This novel salt offers a cost‐effective solution for developing robust, high‐performance batteries suitable for extreme conditions.

Schlagwörter

Stichwörter der Autor:innen

extreme electrolytehigh‐voltage cathodelithium‐ion batterymoisture‐tolerancenovel salt

Autor:innen und Institutionen

  • Department of Chemical and Biomolecular Engineering, University of Maryland, College Park, MD, 20742, USA.

ORCID-Profile: Nan Zhang, Xiyue Zhang, Jijian Xu, Chunsheng Wang

Förderung

  • Basic Energy Sciences

Zitieren

APA

Zhang, N., Li, A. M., Zhang, W., Wang, Z., Liu, Y., Zhang, X., Cai, G., Wan, H., Xu, J., & Wang, C. (2024). 4.6 V Moisture‐Tolerant Electrolytes for Lithium‐Ion Batteries. Advanced Materials, 36(50). https://doi.org/10.1002/adma.202408039

Vancouver

Zhang N, Li AM, Zhang W, Wang Z, Liu Y, Zhang X, et al. 4.6 V Moisture‐Tolerant Electrolytes for Lithium‐Ion Batteries. Advanced Materials. 2024;36(50). doi:10.1002/adma.202408039

BibTeX
@article{Zhang2024,
  author = {Zhang, Nan and Li, Ai-Min and Zhang, Weiran and Wang, Zeyi and Liu, Yijie and Zhang, Xiyue and Cai, Guorui and Wan, Hongli and Xu, Jijian and Wang, Chunsheng},
  title = {4.6 V Moisture‐Tolerant Electrolytes for Lithium‐Ion Batteries},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {50},
  doi = {10.1002/adma.202408039}
}
Kostenlos starten →