EUVIMEDEUVIMED entdecken
Crossref

Sensitive SWIR Organic Photodetectors with Spectral Response Reaching 1.5 µm

Yi Zhang, Jingwen Chen, Jie Yang, Muyi Fu, Yunhao Cao, Minghao Dong, Jiangkai Yu, Sheng Dong, Xiye Yang, Lin Shao, Zhengwei Hu, Houji Cai und 2 weitere

Advanced Materials · 2024-10 · 36 (41)

DOI: 10.1002/adma.202406950 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 17.08.2024. Verfasst von Yi Zhang und 13 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Luminescent Materials and Devices, Guangdong Basic Research Center of Excellence for Energy & Information Polymer Materials, …. Die Arbeit wurde bisher 120-mal zitiert (Crossref) und nennt 94 Literaturangaben. Gefördert von: National Natural Science Foundation of China, National Key R&D Program of China, Basic and Applied Basic Research Foundation of Guangdong Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The performance of organic photodetectors (OPDs) sensitive to the short‐wavelength infrared (SWIR) light lags behind commercial indium gallium arsenide (InGaAs) photodetectors primarily due to the scarcity of organic semiconductors with efficient photoelectric responses exceeding 1.3 µm. Limited by the Energy‐gap law, ultralow‐bandgap organic semiconductors usually suffer from severe non‐radiative transitions, resulting in low external quantum efficiency (EQE). Herein, a difluoro‐substituted quinoid terminal group (QC‐2F) with exceptionally strong electron‐negativity is developed for constructing a new non‐fullerene acceptor (NFA), Y‐QC4F with an ultralow bandgap of 0.83 eV. This subtle structural modification significantly enhances intermolecular packing order and density, enabling an absorption onset up to 1.5 µm while suppressing non‐radiation recombination in Y‐QC4F films. SWIR OPDs based on Y‐QC4F achieve an impressive detectivity ( D *) over 10 11 Jones from 0.4 to 1.5 µm under 0 V bias, with a maximum of 1.68 × 10 12 Jones at 1.16 µm. Furthermore, the resulting OPDs demonstrate competitive performance with commercial photodetectors for high‐quality SWIR imaging even under 1.4 µm irradiation.

Schlagwörter

Stichwörter der Autor:innen

bathochromic shifthigh‐detectivitynon‐fullerene acceptororganic photodetectorshort‐wavelength infrared region

Autor:innen und Institutionen

  • State Key Laboratory of Luminescent Materials and Devices, Guangdong Basic Research Center of Excellence for Energy & Information Polymer Materials, Institute of Polymer Optoelectronic Materials and Devices, School of M…
  • Lumidar Technology Co., Ltd., Guangzhou, 510530, P. R. China.
  • School of Chemistry and Chemical Engineering, Beijing Institute of Technology, Beijing, 100081, P. R. China.

ORCID-Profile: Fei Huang

Förderung

  • National Natural Science Foundation of China
  • National Key R&D Program of China
  • Basic and Applied Basic Research Foundation of Guangdong Province
  • Guangzhou Science and Technology Plan Project
  • National Key Research and Development Program of China

Zitieren

APA

Zhang, Y., Chen, J., Yang, J., Fu, M., Cao, Y., Dong, M., Yu, J., Dong, S., Yang, X., Shao, L., Hu, Z., Cai, H., Liu, C., & Huang, F. (2024). Sensitive SWIR Organic Photodetectors with Spectral Response Reaching 1.5 µm. Advanced Materials, 36(41). https://doi.org/10.1002/adma.202406950

Vancouver

Zhang Y, Chen J, Yang J, Fu M, Cao Y, Dong M, et al. Sensitive SWIR Organic Photodetectors with Spectral Response Reaching 1.5 µm. Advanced Materials. 2024;36(41). doi:10.1002/adma.202406950

BibTeX
@article{Zhang2024,
  author = {Zhang, Yi and Chen, Jingwen and Yang, Jie and Fu, Muyi and Cao, Yunhao and Dong, Minghao and Yu, Jiangkai and Dong, Sheng and Yang, Xiye and Shao, Lin and Hu, Zhengwei and Cai, Houji and Liu, Chunchen and Huang, Fei},
  title = {Sensitive SWIR Organic Photodetectors with Spectral Response Reaching 1.5 µm},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {41},
  doi = {10.1002/adma.202406950}
}
Kostenlos starten →