Interfacial Biomacromolecular Engineering Toward Stable Ah‐Level Aqueous Zinc Batteries
Advanced Materials · 2024-08 · 36 (33)
DOI: 10.1002/adma.202406257 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 27.06.2024. Verfasst von Jiangtao Huang und 10 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science & Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials of Hunan Provinc…. Die Arbeit wurde bisher 181-mal zitiert (Crossref) und nennt 56 Literaturangaben. Gefördert von: National Natural Science Foundation of China, High-Performance Computing Center of Central South University.
Abstract (Originalsprache)
Interfacial instability within aqueous zinc batteries (AZBs) spurs technical obstacles including parasitic side reactions and dendrite failure to reach the practical application standards. Here, an interfacial engineering is showcased by employing a bio‐ derived zincophilic macromolecule as the electrolyte additive (0.037 wt%), which features a long‐chain configuration with laterally distributed hydroxyl and sulfate anion groups, and has the propensity to remodel the electric double layer of Zn anodes. Tailored Zn 2+ ‐rich compact layer is the result of their adaptive adsorption that effectively homogenizes the interfacial concentration field, while enabling a hybrid nucleation and growth mode characterized as nuclei‐rich and space‐confined dense plating. Further resonated with curbed corrosion and by‐products, a dendrite‐free deposition morphology is achieved. Consequently, the macromolecule‐modified zinc anode delivers over 1250 times of reversible plating/stripping at a practical area capacity of 5 mAh cm −2 , as well as a high zinc utilization rate of 85%. The Zn//NH 4 V 4 O 10 pouch cell with the maximum capacity of 1.02 Ah can be steadily operated at 71.4 mA g −1 (0.25 C) with 98.7% capacity retained after 50 cycles, which demonstrates the scale‐up capability and highlights a “low input and high return” interfacial strategy toward practical AZBs.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science & Engineering, Hunan Provincial Key Laboratory of Electronic Packaging and Advanced Functional Materials of Hunan Province, Central South University, Changsha, Hunan, 410083, China.
- School of Physics and Electronics, Hunan University, Changsha, Hunan, 410082, China.
- Institute of Materials Research, Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, Guangdong, 518055, China.
- Information and Network Center, Central South University, Changsha, Hunan, 410083, China.
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA, 02139, USA.
- School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen, Guangdong, 518055, China.
ORCID-Profile: Jiang Zhou
Förderung
- National Natural Science Foundation of China
- High-Performance Computing Center of Central South University
Zitieren
APA
Huang, J., Zhong, Y., Fu, H., Zhao, Y., Li, S., Xie, Y., Zhang, H., Lu, B., Chen, L., Liang, S., & Zhou, J. (2024). Interfacial Biomacromolecular Engineering Toward Stable Ah‐Level Aqueous Zinc Batteries. Advanced Materials, 36(33). https://doi.org/10.1002/adma.202406257
Vancouver
Huang J, Zhong Y, Fu H, Zhao Y, Li S, Xie Y, et al. Interfacial Biomacromolecular Engineering Toward Stable Ah‐Level Aqueous Zinc Batteries. Advanced Materials. 2024;36(33). doi:10.1002/adma.202406257
BibTeX
@article{Huang2024,
author = {Huang, Jiangtao and Zhong, Yunpeng and Fu, Hongwei and Zhao, Yunxiang and Li, Shenglong and Xie, Yiman and Zhang, Hao and Lu, Bingan and Chen, Lina and Liang, Shuquan and Zhou, Jiang},
title = {Interfacial Biomacromolecular Engineering Toward Stable Ah‐Level Aqueous Zinc Batteries},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {33},
doi = {10.1002/adma.202406257}
}
EUVIMED