A High Capacity Gas Diffusion Electrode for Li–O 2 Batteries
Advanced Materials · 2024-10 · 36 (41)
DOI: 10.1002/adma.202405715 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 05.08.2024. Verfasst von Max Jenkins und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials, University of Oxford, Parks Road, Oxford, OX1 3PH, UK. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.
Abstract (Originalsprache)
The very high theoretical specific energy of the lithium–air (Li–O 2 ) battery (3500 Wh kg −1 ) compared with other batteries makes it potentially attractive, especially for the electrification of flight. While progress has been made in realizing the Li–air battery, several challenges remain. One such challenge is achieving a high capacity to store charge at the positive electrode at practical current densities, without which Li–air batteries will not outperform lithium‐ion. The capacity is limited by the mass transport of O 2 throughout the porous carbon positive electrode. Here it is shown that by replacing the binder in the electrode by a polymer with the intrinsic ability to transport O 2 , it is possible to reach capacities as high as 31 mAh cm −2 at 1 mA cm −2 in a 300 µm thick electrode. This corresponds to a positive electrode energy density of 2650 Wh L −1 and specific energy of 1716 Wh kg −1 , exceeding significantly Li‐ion batteries and previously reported Li–O 2 cells. Due to the enhanced oxygen diffusion imparted by the gas diffusion polymer, Li 2 O 2 (the product of O 2 reduction on discharge) fills a greater volume fraction of the electrode and is more homogeneously distributed.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials, University of Oxford, Parks Road, Oxford, OX1 3PH, UK.
- Department of Civil and Industrial Engineering, University of Pisa, Pisa, 56122, Italy.
- Nottingham Applied Materials and Interfaces Group, School of Chemistry, University of Nottingham, Nottingham, NG7 2RD, UK.
- Future Battery Research Centre, Global institute of Future Technology, Shanghai Jiao Tong University, Shanghai, 200240, China.
- Department of Chemistry, University of Oxford, Oxford, OX1 3TA, UK.
ORCID-Profile: Daniel Dewar, Marco Lagnoni, Gregory J Rees, Antonio Bertei, Lee R Johnson, Xiangwen Gao, Peter G Bruce
Förderung
- Engineering and Physical Sciences Research Council
Zitieren
APA
Jenkins, M., Dewar, D., Lagnoni, M., Yang, S., Rees, G. J., Bertei, A., Johnson, L. R., Gao, X., & Bruce, P. G. (2024). A High Capacity Gas Diffusion Electrode for Li–O 2 Batteries. Advanced Materials, 36(41). https://doi.org/10.1002/adma.202405715
Vancouver
Jenkins M, Dewar D, Lagnoni M, Yang S, Rees GJ, Bertei A, et al. A High Capacity Gas Diffusion Electrode for Li–O 2 Batteries. Advanced Materials. 2024;36(41). doi:10.1002/adma.202405715
BibTeX
@article{Jenkins2024,
author = {Jenkins, Max and Dewar, Daniel and Lagnoni, Marco and Yang, Sixie and Rees, Gregory J and Bertei, Antonio and Johnson, Lee R and Gao, Xiangwen and Bruce, Peter G},
title = {A High Capacity Gas Diffusion Electrode for Li–O 2 Batteries},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {41},
doi = {10.1002/adma.202405715}
}
EUVIMED