EUVIMEDEUVIMED entdecken
Crossref

An Active Halide Catholyte Boosts the Extra Capacity for All‐Solid‐State Batteries

Zhenyou Song, Yiming Dai, Tengrui Wang, Qian Yu, Xiaolu Ye, Likuo Wang, Yini Zhang, Suntongxing Wang, Wei Luo iD

Advanced Materials · 2024-08 · 36 (33)

DOI: 10.1002/adma.202405277 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 21.06.2024. Verfasst von Zhenyou Song und 8 weiteren Autor:innen. Beteiligte Einrichtung: Institute of New Energy for Vehicles, School of Materials Science and Engineering, Tongji University, Shanghai, 201804, China. Die Arbeit wurde bisher 50-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Shanghai Pilot Program for Basic Research, Xiaomi Young Talents Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Replacing flammable organic liquid electrolytes with nonflammable solid electrolytes (SEs) in lithium batteries is crucial for enhancing safety across various applications, including portable electronics, electric vehicles, and scalable energy storage. Since typical cathode materials do not possess superionic conductivity, Li‐ion conduction in the cathode predominantly relies on incorporating a significant number of SEs as additives to form a composite cathode, which substantially compromises the energy density of solid‐state lithium batteries. Here, a halide SE, Li 3 VCl 6 is demonstrated, which not only exhibits a decent Li + conductivity, but more importantly, delivers a highly reversible capacity of approximately 80 mAh g −1 with an average voltage of 3 V versus Li + /Li. The ionic conductivity of Li 3 VCl 6 experiences marginal fluctuations upon electrochemical lithiation/delithiation, as its prototypical solid‐solution reaction results solely in a reduction of lithium vacancy. When combined with the traditional LiFePO 4 cathode, the active Li 3 VCl 6 catholyte enables an impressive capacity of 217.1 mAh g −1 LFP and about 50% increase in energy density compared with inactive catholytes. Harnessing the integrated mass of the catholyte—which can serve as an active material—presents an opportunity to boost the extra capacity, rendering it feasible in applications.

Schlagwörter

Stichwörter der Autor:innen

active catholyteall‐solid‐state batteryextra capacityhalidesolid electrolyte

Autor:innen und Institutionen

  • Institute of New Energy for Vehicles, School of Materials Science and Engineering, Tongji University, Shanghai, 201804, China.

ORCID-Profile: Wei Luo

Förderung

  • National Natural Science Foundation of China
  • Shanghai Pilot Program for Basic Research
  • Xiaomi Young Talents Program

Zitieren

APA

Song, Z., Dai, Y., Wang, T., Yu, Q., Ye, X., Wang, L., Zhang, Y., Wang, S., & Luo, W. (2024). An Active Halide Catholyte Boosts the Extra Capacity for All‐Solid‐State Batteries. Advanced Materials, 36(33). https://doi.org/10.1002/adma.202405277

Vancouver

Song Z, Dai Y, Wang T, Yu Q, Ye X, Wang L, et al. An Active Halide Catholyte Boosts the Extra Capacity for All‐Solid‐State Batteries. Advanced Materials. 2024;36(33). doi:10.1002/adma.202405277

BibTeX
@article{Song2024,
  author = {Song, Zhenyou and Dai, Yiming and Wang, Tengrui and Yu, Qian and Ye, Xiaolu and Wang, Likuo and Zhang, Yini and Wang, Suntongxing and Luo, Wei},
  title = {An Active Halide Catholyte Boosts the Extra Capacity for All‐Solid‐State Batteries},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {33},
  doi = {10.1002/adma.202405277}
}
Kostenlos starten →