Toward Predicting the Formation of Integral‐Asymmetric, Isoporous Diblock Copolymer Membranes
Advanced Materials · 2024-10 · 36 (40)
DOI: 10.1002/adma.202404560 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 29.08.2024. Verfasst von Niklas Blagojevic und 7 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Theoretical Physics, Georg August University Göttingen, Friedrich-Hund-Platz 1, 37077, Göttingen, Germany. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 74 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bundesministerium für Bildung und Forschung, Gauss Centre for Supercomputing.
Abstract (Originalsprache)
The self‐assembly and nonsolvent‐induced phase separation (SNIPS) process of block copolymers and solvents enables the fabrication of integral‐asymmetric, isoporous membranes. An isoporous top layer is formed by evaporation‐induced self‐assembly (EISA) and imparts selectivity for ultrafiltration of functional macromolecules or water purification. This selective layer is supported by a macroporous bottom structure that is formed by nonsolvent‐induced phase separation (NIPS) providing mechanical stability. Thereby the permeability/selectivity tradeoff is optimized. The SNIPS fabrication involves various physical phenomena—e.g., evaporation, self‐assembly, macrophase separation, vitrification – and multiple structural, thermodynamic, kinetic, and process parameters. Optimizing membrane properties and rationally designing fabrication processes is a challenge which particle simulation can significantly contribute to. Using large‐scale particle simulations, it is observed that 1) a small incompatibility between matrix‐forming block of the copolymer and nonsolvent, 2) a glassy arrest that occurs at a smaller polymer concentration, or 3) a higher dynamical contrast between polymer and solvent results in a finer, spongy substructure, whereas the opposite parameter choice gives rise to larger macropores with an elongated shape. These observations are confirmed by comparison to experiments on polystyrene (PS)‐ block ‐poly(4‐vinylpyridine) (P4VP) diblock copolymer membranes, varying the chemical nature of the coagulant or the temperature of coagulation bath.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute for Theoretical Physics, Georg August University Göttingen, Friedrich-Hund-Platz 1, 37077, Göttingen, Germany.
- Institute of Membrane Research, Helmholtz-Zentrum Hereon, Max-Planck-Straße 1, 21502, Geesthacht, Germany.
- Institute of Physical Chemistry, University of Hamburg, Grindelallee 117, 20146, Hamburg, Germany.
ORCID-Profile: Niklas Blagojevic, Shibananda Das, Jiayu Xie, Oliver Dreyer, Maryam Radjabian, Martin Held, Volker Abetz, Marcus Müller
Förderung
- Bundesministerium für Bildung und Forschung
- Gauss Centre for Supercomputing
Zitieren
APA
Blagojevic, N., Das, S., Xie, J., Dreyer, O., Radjabian, M., Held, M., Abetz, V., & Müller, M. (2024). Toward Predicting the Formation of Integral‐Asymmetric, Isoporous Diblock Copolymer Membranes. Advanced Materials, 36(40). https://doi.org/10.1002/adma.202404560
Vancouver
Blagojevic N, Das S, Xie J, Dreyer O, Radjabian M, Held M, et al. Toward Predicting the Formation of Integral‐Asymmetric, Isoporous Diblock Copolymer Membranes. Advanced Materials. 2024;36(40). doi:10.1002/adma.202404560
BibTeX
@article{Blagojevic2024,
author = {Blagojevic, Niklas and Das, Shibananda and Xie, Jiayu and Dreyer, Oliver and Radjabian, Maryam and Held, Martin and Abetz, Volker and Müller, Marcus},
title = {Toward Predicting the Formation of Integral‐Asymmetric, Isoporous Diblock Copolymer Membranes},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {40},
doi = {10.1002/adma.202404560}
}
EUVIMED