Van der Waals Encapsulation by Ultrathin Oxide for Air‐Sensitive 2D Materials
Advanced Materials · 2024-08 · 36 (33)
DOI: 10.1002/adma.202403494 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 22.06.2024. Verfasst von Kongyang Yi und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Nanyang Technological University, Singapore, 639798, Singapore. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 34 Literaturangaben. Gefördert von: National Research Foundation, Singapore, under its Competitive Research Programme, NRF-ISF Joint Research Program, A*STAR under its AME IRG.
Abstract (Originalsprache)
The ambient stability is one of the focal points for applications of 2D materials, especially for those well‐known air‐sensitive ones, such as black phosphorus (BP) and transitional metal telluride. Traditional methods of encapsulation, such as atomic layer deposition of oxides and heterogeneous integration of hexagonal boron nitride, can hardly avoid removal of encapsulation layer when the 2D materials are encapsulated for further device fabrication, which causes complexity and damage during the procedure. Here, a van der Waals encapsulation method that allows direct device fabrication without removal of encapsulation layer is introduced using Ga 2 O 3 from liquid gallium. Taking advantage of the robust isolation ability against ambient environment of the dense native oxide of gallium, hundreds of times longer retention time of (opto)electronic properties of encapsulated BP and MoTe 2 devices is realized than unencapsulated devices. Due to the ultrathin high‐κ properties of Ga 2 O 3 , top‐gated devices are directly fabricated with the encapsulation layer, simultaneously as a dielectric layer. This direct device fabrication is realized by selective etching of Ga 2 O 3 , leaving the encapsulated materials intact. Encapsulated 1T' MoTe 2 exhibits high conductivity even after 150 days in ambient environment. This method is, therefore, highlighted as a promising and distinctive one compared with traditional passivation approaches.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science and Engineering, Nanyang Technological University, Singapore, 639798, Singapore.
- Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University, Singapore, 637371, Singapore.
ORCID-Profile: Kongyang Yi, Liheng An, Weibo Gao, Zheng Liu
Förderung
- National Research Foundation, Singapore, under its Competitive Research Programme
- NRF-ISF Joint Research Program
- A*STAR under its AME IRG
- Ministry of Education, Singapore, under its Research Centre of Excellence award to the Institute for Functional Intelligent Materials
- A*STAR MTC Programmatic Grant
Zitieren
APA
Yi, K., Wu, Y., An, L., Deng, Y., Duan, R., Yang, J., Zhu, C., Gao, W., & Liu, Z. (2024). Van der Waals Encapsulation by Ultrathin Oxide for Air‐Sensitive 2D Materials. Advanced Materials, 36(33). https://doi.org/10.1002/adma.202403494
Vancouver
Yi K, Wu Y, An L, Deng Y, Duan R, Yang J, et al. Van der Waals Encapsulation by Ultrathin Oxide for Air‐Sensitive 2D Materials. Advanced Materials. 2024;36(33). doi:10.1002/adma.202403494
BibTeX
@article{Yi2024,
author = {Yi, Kongyang and Wu, Yao and An, Liheng and Deng, Ya and Duan, Ruihuan and Yang, Jiefu and Zhu, Chao and Gao, Weibo and Liu, Zheng},
title = {Van der Waals Encapsulation by Ultrathin Oxide for Air‐Sensitive 2D Materials},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {33},
doi = {10.1002/adma.202403494}
}
EUVIMED