EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Functional Thermoplastic Polyurethane Elastomers with α, ω ‐Hydroxyl End‐Functionalized Polyacrylates

Changhoon Yu, Jinho Choi, Jungwook Lee, Sumin Lim, Youngjoo Park, Seong Min Jo, Junyoung Ahn, So Youn Kim, Taihyun Chang, Cyrille Boyer, Min Sang Kwon iD

Advanced Materials · 2024-10 · 36 (40)

DOI: 10.1002/adma.202403048 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 22.08.2024. Verfasst von Changhoon Yu und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Research Institute of Advanced Materials, Seoul National University, Seoul, 08826, Republic of Korea. Die Arbeit wurde bisher 37-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Australian Research Council, Samsung.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermoplastic polyurethane (TPU) is an essential class of materials for demanding applications, from soft robotics and electronics to medical devices and batteries. However, traditional TPU development is primarily relied on specific soft segments, such as polyether, polyester, and polycarbonate polyols. Here, a novel method is introduced for developing TPU elastomers with enhanced performance and superior functionalities compared to conventional TPUs, achieved through the use of α,ω ‐hydroxyl end‐functionalized polyacrylates. This approach involves a defect‐free synthesis of α,ω ‐hydroxyl end‐functionalized polyacrylates through visible‐light‐driven photoiniferter polymerization. By strategically blending these functionalized polyacrylates with conventional polyols, TPUs that exhibit exceptional toughness and notable self‐healing capabilities, traits rarely found in existing TPUs are engineered. Furthermore, incorporating photo‐crosslinkable acrylic monomers has enabled the creation of the first TPU with superior elastomeric properties and photopatterning capabilities. This approach paves the way for a new direction in polyurethane engineering, introducing a novel class of soft segments and unlocking the potential for a wide range of advanced applications.

Schlagwörter

Stichwörter der Autor:innen

photopatternable elastomerpolyacrylate polyurethaneself‐healable elastomerthermoplastic polyurethanetough elastomer

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, Research Institute of Advanced Materials, Seoul National University, Seoul, 08826, Republic of Korea.
  • Department of Chemical and Biological Engineering, Seoul National University, Seoul, 08826, Republic of Korea.
  • Department of Chemistry and Division of Advanced Materials Science, Pohang University of Science and Technology (POSTECH), Pohang, 37673, Republic of Korea.
  • Cluster for Advanced Macromolecular Design (CAMD), School of Chemical Engineering, and Australian Centre for Nanomedicine, School of Chemical Engineering, UNSW Australia, Sydney, NSW, 2052, Australia.

ORCID-Profile: Min Sang Kwon

Förderung

  • Australian Research Council
  • Samsung

Zitieren

APA

Yu, C., Choi, J., Lee, J., Lim, S., Park, Y., Jo, S. M., Ahn, J., Kim, S. Y., Chang, T., Boyer, C., & Kwon, M. S. (2024). Functional Thermoplastic Polyurethane Elastomers with α, ω ‐Hydroxyl End‐Functionalized Polyacrylates. Advanced Materials, 36(40). https://doi.org/10.1002/adma.202403048

Vancouver

Yu C, Choi J, Lee J, Lim S, Park Y, Jo SM, et al. Functional Thermoplastic Polyurethane Elastomers with α, ω ‐Hydroxyl End‐Functionalized Polyacrylates. Advanced Materials. 2024;36(40). doi:10.1002/adma.202403048

BibTeX
@article{Yu2024,
  author = {Yu, Changhoon and Choi, Jinho and Lee, Jungwook and Lim, Sumin and Park, Youngjoo and Jo, Seong Min and Ahn, Junyoung and Kim, So Youn and Chang, Taihyun and Boyer, Cyrille and Kwon, Min Sang},
  title = {Functional Thermoplastic Polyurethane Elastomers with α, ω ‐Hydroxyl End‐Functionalized Polyacrylates},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {40},
  doi = {10.1002/adma.202403048}
}
Kostenlos starten →