In Situ Polymerization Facilitating Practical High‐Safety Quasi‐Solid‐State Batteries
Advanced Materials · 2024-07 · 36 (27)
DOI: 10.1002/adma.202402401 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 23.04.2024. Verfasst von Xinyu Rui und 14 weiteren Autor:innen. Beteiligte Einrichtung: School of Vehicle and Mobility, Tsinghua University, Beijing, 100084, P. R. China. Die Arbeit wurde bisher 74-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: Ministry of Science and Technology of China, Sichuan Science and Technology Program, National Key Research and Development Program of China.
Abstract (Originalsprache)
Quasi‐solid‐state batteries (QSSBs) are gaining widespread attention as a promising solution to improve battery safety performance. However, the safety improvement and the underlying mechanisms of QSSBs remain elusive. Herein, a novel strategy combining high‐safety ethylene carbonate‐free liquid electrolyte and in situ polymerization technique is proposed to prepare practical QSSBs. The Ah‐level QSSBs with LiNi 0.83 Co 0.11 Mn 0.06 O 2 cathode and graphite–silicon anode demonstrate significantly improved safety features without sacrificing electrochemical performance. As evidenced by accelerating rate calorimetry tests, the QSSBs exhibit increased self‐heating temperature and onset temperature ( T 2 ), and decreased temperature rise rate during thermal runaway (TR). The T 2 has a maximum increase of 48.4 °C compared to the conventional liquid batteries. Moreover, the QSSBs do not undergo TR until 180 °C (even 200 °C) during the hot‐box tests, presenting significant improvement compared to the liquid batteries that run into TR at 130 °C. Systematic investigations show that the in situ formed polymer skeleton effectively mitigates the exothermic reactions between lithium salts and lithiated anode, retards the oxygen release from cathode, and inhibits crosstalk reactions between cathode and anode at elevated temperatures. The findings offer an innovative solution for practical high‐safety QSSBs and open up a new sight for building safer high‐energy‐density batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Vehicle and Mobility, Tsinghua University, Beijing, 100084, P. R. China.
- Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing, 100084, P. R. China.
- Prof. Ouyang Minggao Academician Workstation, Sichuan New Energy Vehicle Innovation Center Co., Ltd., Sichuan, 644000, P. R. China.
- School of Materials Science and Engineering, Beijing Institute of Technology, Beijing, 100081, China.
- School of Material Science and Engineering, Beihang University, Beijing, 100084, P. R. China.
ORCID-Profile: Dongsheng Ren, Minggao Ouyang
Förderung
- Ministry of Science and Technology of China
- Sichuan Science and Technology Program
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Guangxi Laboratory of New Energy Automobile Project
- Young Elite Scientists Sponsorship Program by CAST
Zitieren
APA
Rui, X., Hua, R., Ren, D., Qiu, F., Wu, Y., Qiu, Y., Mao, Y., Guo, Y., Zhu, G., Liu, X., Gao, Y., Zhao, C., Feng, X., Lu, L., & Ouyang, M. (2024). In Situ Polymerization Facilitating Practical High‐Safety Quasi‐Solid‐State Batteries. Advanced Materials, 36(27). https://doi.org/10.1002/adma.202402401
Vancouver
Rui X, Hua R, Ren D, Qiu F, Wu Y, Qiu Y, et al. In Situ Polymerization Facilitating Practical High‐Safety Quasi‐Solid‐State Batteries. Advanced Materials. 2024;36(27). doi:10.1002/adma.202402401
BibTeX
@article{Rui2024,
author = {Rui, Xinyu and Hua, Rui and Ren, Dongsheng and Qiu, Feng and Wu, Yu and Qiu, Yue and Mao, Yuqiong and Guo, Yi and Zhu, Gaolong and Liu, Xiang and Gao, Yike and Zhao, Chang and Feng, Xuning and Lu, Languang and Ouyang, Minggao},
title = {In Situ Polymerization Facilitating Practical High‐Safety Quasi‐Solid‐State Batteries},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {27},
doi = {10.1002/adma.202402401}
}
EUVIMED