EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Toward Design Rules for Multilayer Ferroelectric Energy Storage Capacitors – A Study Based on Lead‐Free and Relaxor‐Ferroelectric/Paraelectric Multilayer Devices

Minh D Nguyen iD, Evert P Houwman, Yorick A Birkhölzer, Hung N Vu, Gertjan Koster, Guus Rijnders

Advanced Materials · 2024-06 · 36 (26)

DOI: 10.1002/adma.202402070 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 21.04.2024. Verfasst von Minh D Nguyen und 5 weiteren Autor:innen. Beteiligte Einrichtung: MESA+ Institute for Nanotechnology, University of Twente, P.O. Box 217, 7500 AE, Enschede, The Netherlands. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: University of Twente.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Future pulsed‐power electronic systems based on dielectric capacitors require the use of environment‐friendly materials with high energy‐storage performance that can operate efficiently and reliably in harsh environments. Here, a study of multilayer structures, combining paraelectric‐like Ba 0.6 Sr 0.4 TiO 3 (BST) with relaxor‐ferroelectric BaZr 0.4 Ti 0.6 O 3 (BZT) layers on SrTiO 3 ‐buffered Si substrates, with the goal to optimize the high energy‐storage performance is presented. The energy‐storage properties of various stackings are investigated and an extremely large maximum recoverable energy storage density of ≈165.6 J cm −3 (energy efficiency ≈ 93%) is achieved for unipolar charging–discharging of a 25‐nm‐BZT/20‐nm‐BST/910‐nm‐BZT/20‐nm‐BST/25‐nm‐BZT multilayer structure, due to the extremely large breakdown field of 7.5 MV cm −1 and the lack of polarization saturation at high fields in this device. Strong indications are found that the breakdown field of the devices is determined by the outer layers of the multilayer stack and can be increased by improving the quality of these layers. Authors are also able to deduce design optimization rules for this material combination, which can be to a large extend justify by structural analysis. These rules are expected also to be useful for optimizing other multilayer systems and are therefore very relevant for further increasing the energy storage density of capacitors.

Schlagwörter

Stichwörter der Autor:innen

breakdown strengthsenergy storagelead‐freemultilayersparaelectricsrelaxors

Autor:innen und Institutionen

  • MESA+ Institute for Nanotechnology, University of Twente, P.O. Box 217, 7500 AE, Enschede, The Netherlands.
  • International Training Institute for Materials Science (ITIMS), Hanoi University of Science and Technology, 1 Dai Co Viet Road, Hanoi, 100000, Vietnam.

ORCID-Profile: Minh D Nguyen

Förderung

  • University of Twente

Zitieren

APA

Nguyen, M. D., Houwman, E. P., Birkhölzer, Y. A., Vu, H. N., Koster, G., & Rijnders, G. (2024). Toward Design Rules for Multilayer Ferroelectric Energy Storage Capacitors – A Study Based on Lead‐Free and Relaxor‐Ferroelectric/Paraelectric Multilayer Devices. Advanced Materials, 36(26). https://doi.org/10.1002/adma.202402070

Vancouver

Nguyen MD, Houwman EP, Birkhölzer YA, Vu HN, Koster G, Rijnders G. Toward Design Rules for Multilayer Ferroelectric Energy Storage Capacitors – A Study Based on Lead‐Free and Relaxor‐Ferroelectric/Paraelectric Multilayer Devices. Advanced Materials. 2024;36(26). doi:10.1002/adma.202402070

BibTeX
@article{Nguyen2024,
  author = {Nguyen, Minh D and Houwman, Evert P and Birkhölzer, Yorick A and Vu, Hung N and Koster, Gertjan and Rijnders, Guus},
  title = {Toward Design Rules for Multilayer Ferroelectric Energy Storage Capacitors – A Study Based on Lead‐Free and Relaxor‐Ferroelectric/Paraelectric Multilayer Devices},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {26},
  doi = {10.1002/adma.202402070}
}
Kostenlos starten →