EUVIMEDEUVIMED entdecken
Crossref

Short‐Wave Infrared Colloidal QD Photodetector with Nanosecond Response Times Enabled by Ultrathin Absorber Layers

Yu-Hao Deng iD, Chao Pang, Ezat Kheradmand, Jari Leemans, Jing Bai, Matthias Minjauw, Jiayi Liu, Korneel Molkens, Jeroen Beeckman, Christophe Detavernier, Pieter Geiregat, Dries Van Thourhout und 1 weitere

Advanced Materials · 2024-07 · 36 (28)

DOI: 10.1002/adma.202402002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 03.05.2024. Verfasst von Yu-Hao Deng und 12 weiteren Autor:innen. Beteiligte Einrichtung: Physics and Chemistry of Nanostructures Group, Ghent University, Ghent, 9000, Belgium. Die Arbeit wurde bisher 80-mal zitiert (Crossref) und nennt 35 Literaturangaben. Gefördert von: FWO-Vlaanderen, Ghent University, European Research Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Ultrafast short‐wavelength infrared (SWIR) photodetection is of great interest for emerging automated vision and spatial mapping technologies. Colloidal quantum dots (QDs) stand out for SWIR photodetection compared to epitaxial (In,Ga)As or (Hg,Cd)Te semiconductors by their combining a size‐tunable bandgap and a suitability for cost‐effective, solution‐based processing. However, achieving ultrafast, nanosecond‐level response time has remained an outstanding challenge for QD‐based SWIR photodiodes (QDPDs). Here, record 4 ns response time in PbS‐based QDPDs that operate at SWIR wavelengths is reported, a result reaching the requirement of SWIR light detection and ranging based on colloidal QDs. These ultrafast QDPDs combine a thin active layer to reduce the carrier transport time and a small area to inhibit slow capacitive discharging. By implementing a concentration gradient ligand exchange method, high‐quality p–n junctions are fabricated in these ultrathin QDPDs. Moreover, these ultrathin QDPDs attain an external quantum efficiency of 42% at 1330 nm, due to a 2.5‐fold enhanced light absorption through the formation of a Fabry–Perot cavity within the QDPD and the highly efficient extraction (98%) of photogenerated charge carriers. Based on these results, it is estimated that a further increase of the charge‐carrier mobility can lead to PbS QDPDs with sub‐nanosecond response time.

Schlagwörter

Stichwörter der Autor:innen

colloidal quantum dotsphotodetectorshort‐wave infraredultrafast

Autor:innen und Institutionen

  • Physics and Chemistry of Nanostructures Group, Ghent University, Ghent, 9000, Belgium.
  • Center for Nano and Biophotonics, Ghent University, Ghent, 9052, Belgium.
  • Photonics Research Group, Ghent University, Ghent, 9052, Belgium.
  • Department of Solid State Sciences, Ghent University, Ghent, 9000, Belgium.
  • Department of Electronics and Information Systems, Ghent University, Ghent, 9052, Belgium.

ORCID-Profile: Yu-Hao Deng, Zeger Hens

Förderung

  • FWO-Vlaanderen
  • Ghent University
  • European Research Council
  • Universiteit Gent

Zitieren

APA

Deng, Y. H., Pang, C., Kheradmand, E., Leemans, J., Bai, J., Minjauw, M., Liu, J., Molkens, K., Beeckman, J., Detavernier, C., Geiregat, P., Van Thourhout, D., & Hens, Z. (2024). Short‐Wave Infrared Colloidal QD Photodetector with Nanosecond Response Times Enabled by Ultrathin Absorber Layers. Advanced Materials, 36(28). https://doi.org/10.1002/adma.202402002

Vancouver

Deng YH, Pang C, Kheradmand E, Leemans J, Bai J, Minjauw M, et al. Short‐Wave Infrared Colloidal QD Photodetector with Nanosecond Response Times Enabled by Ultrathin Absorber Layers. Advanced Materials. 2024;36(28). doi:10.1002/adma.202402002

BibTeX
@article{Deng2024,
  author = {Deng, Yu-Hao and Pang, Chao and Kheradmand, Ezat and Leemans, Jari and Bai, Jing and Minjauw, Matthias and Liu, Jiayi and Molkens, Korneel and Beeckman, Jeroen and Detavernier, Christophe and Geiregat, Pieter and Van Thourhout, Dries and Hens, Zeger},
  title = {Short‐Wave Infrared Colloidal QD Photodetector with Nanosecond Response Times Enabled by Ultrathin Absorber Layers},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {28},
  doi = {10.1002/adma.202402002}
}
Kostenlos starten →