EUVIMEDEUVIMED entdecken
Crossref

570 Wh kg⁻ 1 ‐Grade Lithium Metal Pouch Cell with 4.9V Highly Li + Conductive Armor‐Like Cathode Electrolyte Interphase via Partially Fluorinated Electrolyte Engineering

Xiangxiang Liu, Yong Li, Jiandong Liu, Huaping Wang, Xiujuan Zhuang, Jianmin Ma iD

Advanced Materials · 2024-06 · 36 (24)

DOI: 10.1002/adma.202401505 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 11.03.2024. Verfasst von Xiangxiang Liu und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Physics and Electronics, Hunan University, Changsha, 410082, P. R. China. Die Arbeit wurde bisher 74-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lithium‐rich manganese‐based layered oxides (LRMOs) are promisingly used in high‐energy lithium metal pouch cells due to high specific capacity/working voltage. However, the interfacial stability of LRMOs remains challenging. To address this question, a novel armor‐like cathode electrolyte interphase (CEI) model is proposed for stabilizing LRMO cathode at 4.9 V by exploring partially fluorinated electrolyte formulation. The fluoroethylene carbonate (FEC) and tris (trimethylsilyl) borate (TMSB) in formulated electrolyte largely contribute to the formation of 4.9 V armor‐like CEI with LiB x O y and Li x PO y F z outer layer and LiF‐ and Li 3 PO 4 ‐rich inner part. Such CEI effectively inhibits lattice oxygen loss and facilitates the Li + migration smoothly for guaranteeing LRMO cathode to deliver superior cycling and rate performance. As expected, Li||LRMO batteries with such electrolyte achieve capacity retention of 85.7% with high average Coulomb efficiency (CE) of 99.64% after 300 cycles at 4.8 V/0.5 C, and even obtain capacity retention of 87.4% after 100 cycles at higher cut‐off voltage of 4.9 V. Meanwhile, the 9 Ah‐class Li||LRMO pouch cells with formulated electrolyte show over thirty‐eight stable cycling life with high energy density of 576 Wh kg −1 at 4.8 V.

Schlagwörter

Stichwörter der Autor:innen

cathode electrolyte interphasehigh‐voltage batterieslithium metal batterieslithium‐rich manganese‐based oxidespartially fluorinated electrolyte

Autor:innen und Institutionen

  • School of Physics and Electronics, Hunan University, Changsha, 410082, P. R. China.
  • State Key Laboratory of Space Power-Sources Technology, Shanghai Institute of Space Power Sources, Shanghai, 200245, China.
  • School of Chemistry, Tiangong University, Tianjin, 300387, China.

ORCID-Profile: Jianmin Ma

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Liu, X., Li, Y., Liu, J., Wang, H., Zhuang, X., & Ma, J. (2024). 570 Wh kg⁻ 1 ‐Grade Lithium Metal Pouch Cell with 4.9V Highly Li + Conductive Armor‐Like Cathode Electrolyte Interphase via Partially Fluorinated Electrolyte Engineering. Advanced Materials, 36(24). https://doi.org/10.1002/adma.202401505

Vancouver

Liu X, Li Y, Liu J, Wang H, Zhuang X, Ma J. 570 Wh kg⁻ 1 ‐Grade Lithium Metal Pouch Cell with 4.9V Highly Li + Conductive Armor‐Like Cathode Electrolyte Interphase via Partially Fluorinated Electrolyte Engineering. Advanced Materials. 2024;36(24). doi:10.1002/adma.202401505

BibTeX
@article{Liu2024,
  author = {Liu, Xiangxiang and Li, Yong and Liu, Jiandong and Wang, Huaping and Zhuang, Xiujuan and Ma, Jianmin},
  title = {570 Wh kg⁻ 1 ‐Grade Lithium Metal Pouch Cell with 4.9V Highly Li + Conductive Armor‐Like Cathode Electrolyte Interphase via Partially Fluorinated Electrolyte Engineering},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {24},
  doi = {10.1002/adma.202401505}
}
Kostenlos starten →