Phase‐Centric MOCVD Enabled Synthetic Approaches for Wafer‐Scale 2D Tin Selenides
Advanced Materials · 2024-07 · 36 (28)
DOI: 10.1002/adma.202400800 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 19.04.2024. Verfasst von Sungyeon Kim und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, Ulsan National Institute of Science and Technology, Ulsan, 44919, South Korea. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: National Natural Science Foundation of China, Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences, Ulsan National Institute of Science and Technology.
Abstract (Originalsprache)
Following an initial nucleation stage at the flake level, atomically thin film growth of a van der Waals material is promoted by ultrafast lateral growth and prohibited vertical growth. To produce these highly anisotropic films, synthetic or post‐synthetic modifications are required, or even a combination of both, to ensure large‐area, pure‐phase, and low‐temperature deposition. A set of synthetic strategies is hereby presented to selectively produce wafer‐scale tin selenides, SnSe x (both x = 1 and 2), in the 2D forms. The 2D‐SnSe 2 films with tuneable thicknesses are directly grown via metal–organic chemical vapor deposition (MOCVD) at 200 °C, and they exhibit outstanding crystallinities and phase homogeneities and consistent film thickness across the entire wafer. This is enabled by excellent control of the volatile metal–organic precursors and decoupled dual‐temperature regimes for high‐temperature ligand cracking and low‐temperature growth. In contrast, SnSe, which intrinsically inhibited from 2D growth, is indirectly prepared by a thermally driven phase transition of an as‐grown 2D‐SnSe 2 film with all the benefits of the MOCVD technique. It is accompanied by the electronic n ‐type to p ‐type crossover at the wafer scale. These tailor‐made synthetic routes will accelerate the low‐thermal‐budget production of multiphase 2D materials in a reliable and scalable fashion.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Science and Engineering, Ulsan National Institute of Science and Technology, Ulsan, 44919, South Korea.
- Graduate School of Semiconductor Materials and Devices Engineering, Ulsan National Institute of Science and Technology, Ulsan, 44919, South Korea.
- Department of Nanotechnology and Advanced Materials Engineering, Sejong University, Seoul, 05006, South Korea.
- Shenzhen Institute of Advanced Technology, Chinese Academy of Science, Shenzhen, 518055, China.
ORCID-Profile: Feng Ding, Joonki Suh
Förderung
- National Natural Science Foundation of China
- Shenzhen Institutes of Advanced Technology, Chinese Academy of Sciences
- Ulsan National Institute of Science and Technology
- Ministry of Science and ICT, South Korea
Zitieren
APA
Kim, S., Lee, W., Ko, K., Cho, H., Cho, H., Jeon, S., Jeong, C., Kim, S., Ding, F., & Suh, J. (2024). Phase‐Centric MOCVD Enabled Synthetic Approaches for Wafer‐Scale 2D Tin Selenides. Advanced Materials, 36(28). https://doi.org/10.1002/adma.202400800
Vancouver
Kim S, Lee W, Ko K, Cho H, Cho H, Jeon S, et al. Phase‐Centric MOCVD Enabled Synthetic Approaches for Wafer‐Scale 2D Tin Selenides. Advanced Materials. 2024;36(28). doi:10.1002/adma.202400800
BibTeX
@article{Kim2024,
author = {Kim, Sungyeon and Lee, Wookhee and Ko, Kyungmin and Cho, Hanbin and Cho, Hoyeon and Jeon, Seonhwa and Jeong, Changwook and Kim, Sungkyu and Ding, Feng and Suh, Joonki},
title = {Phase‐Centric MOCVD Enabled Synthetic Approaches for Wafer‐Scale 2D Tin Selenides},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {28},
doi = {10.1002/adma.202400800}
}
EUVIMED