Formation of 2D Amorphous Lithium Sulfide Enabled by Mo 2 C Clusters Loaded Carbon Scaffold for High‐Performance Lithium Sulfur Batteries
Advanced Materials · 2024-07 · 36 (28)
DOI: 10.1002/adma.202400639 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 02.05.2024. Verfasst von Huadong Yuan und 11 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou, 310014, China. Die Arbeit wurde bisher 64-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: National Key Research and Development Program of China, National Natural Science Foundation of China, Leading nonnative and Entrepreneur Team Introduction Program of Zhejiang.
Abstract (Originalsprache)
Lithium‐sulfur (Li‐S) batteries, operated through the interconversion between sulfur and solid‐state lithium sulfide, are regarded as next‐generation energy storage systems. However, the sluggish kinetics of lithium sulfide deposition/dissolution, caused by its insoluble and insulated nature, hampers the practical use of Li‐S batteries. Herein, leaf‐like carbon scaffold (LCS) with the modification of Mo 2 C clusters (Mo 2 C@LCS) is reported as host material of sulfur powder. During cycles, the dissociative Mo ions at the Mo 2 C@LCS/electrolyte interface are detected to exhibit competitive binding energy with Li ions for lithium sulfide anions, which disrupts the deposition behavior of crystalline lithium sulfide and trends a shift in the configuration of lithium sulfide toward an amorphous structure. Combining the related electrochemical study and first‐principle calculation, it is revealed that the formation of amorphous lithium sulfides shows significantly improved kinetics for lithium sulfide deposition and decomposition. As a result, the obtained Mo 2 C@LCS/S cathode shows an ultralow capacity decay rate of 0.015% per cycle at a high mass loading of 9.5 mg cm −2 after 700 cycles. More strikingly, an ultrahigh sulfur loading of 61.2 mg cm −2 can also be achieved. This work defines an efficacious strategy to advance the commercialization of Mo 2 C@LCS host for Li‐S batteries.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- College of Materials Science and Engineering, Zhejiang University of Technology, Hangzhou, 310014, China.
- Quzhou Institute of Power Battery and Grid Energy Storage, Quzhou, 324000, China.
- Institute of Functional Nano & Soft Materials (FUNSOM), Jiangsu Key Laboratory of Advanced Negative Carbon Technologies, Soochow University, Suzhou, 215123, China.
- International Iberian Nanotechnology Laboratory (INL), Braga, 4715-330, Portugal.
ORCID-Profile: Xinyong Tao
Förderung
- National Key Research and Development Program of China
- National Natural Science Foundation of China
- Leading nonnative and Entrepreneur Team Introduction Program of Zhejiang
Zitieren
APA
Yuan, H., Zheng, J., Lu, G., Zhang, L., Yan, T., Luo, J., Wang, Y., Liu, Y., Guo, T., Wang, Z., Nai, J., & Tao, X. (2024). Formation of 2D Amorphous Lithium Sulfide Enabled by Mo 2 C Clusters Loaded Carbon Scaffold for High‐Performance Lithium Sulfur Batteries. Advanced Materials, 36(28). https://doi.org/10.1002/adma.202400639
Vancouver
Yuan H, Zheng J, Lu G, Zhang L, Yan T, Luo J, et al. Formation of 2D Amorphous Lithium Sulfide Enabled by Mo 2 C Clusters Loaded Carbon Scaffold for High‐Performance Lithium Sulfur Batteries. Advanced Materials. 2024;36(28). doi:10.1002/adma.202400639
BibTeX
@article{Yuan2024,
author = {Yuan, Huadong and Zheng, Jianhui and Lu, Gongxun and Zhang, Liang and Yan, Tianran and Luo, Jianmin and Wang, Yao and Liu, Yujing and Guo, Tianqi and Wang, Zhongchang and Nai, Jianwei and Tao, Xinyong},
title = {Formation of 2D Amorphous Lithium Sulfide Enabled by Mo 2 C Clusters Loaded Carbon Scaffold for High‐Performance Lithium Sulfur Batteries},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {28},
doi = {10.1002/adma.202400639}
}
EUVIMED