Pyroelectric‐Accelerated Perovskite Photodetector for Picosecond Light Detection and Ranging
Advanced Materials · 2024-06 · 36 (26)
DOI: 10.1002/adma.202400279 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 05.04.2024. Verfasst von Liangliang Min und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Physical Science and Technology, Jiangsu Key Laboratory of Thin Films, Center for Energy Conversion Materials & Physics (CECMP), Soochow Un…. Die Arbeit wurde bisher 70-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Jiangsu Province, Priority Academic Program Development (PAPD) of Jiangsu Higher Education Institutions.
Abstract (Originalsprache)
Light detection and ranging (LiDAR) is indispensable in applications such as unmanned aerial vehicles, autonomous driving, and biomimetic robots. However, the precision and available distance of LiDAR are constrained by the speed and sensitivity of the photodetector, necessitating the use of expensive and energy‐consuming avalanche diodes. To address these challenges, in this study, a pyroelectricity‐based acceleration strategy with 2D‐(graded 3D) perovskite heterojunction is proposed to achieve a record high speed (27.7 ns with an active area of 9 mm 2 , and 176 ps with an active area of 0.2 mm 2 ) and high responsivity (0.65 A W −1 ) at zero bias. This success is attributed to the unique mechanism where the electrons from the pyroelectric effect at the Cl‐rich 2D/3D interface directly recombine with excess holes during light–dark transitions, breaking speed limitations related to carrier mobility and capacitive effect. Furthermore, the introduced pyroelectric effect significantly enhances the photoresponse, resulting in a self‐powered external quantum efficiency exceeding 100%. The study also demonstrates precise position detection at the centimeter level. In conclusion, this research presents a pioneering approach for developing high‐speed photodiodes with exceptional sensitivity, mitigating energy and cost concerns in LiDAR applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Physical Science and Technology, Jiangsu Key Laboratory of Thin Films, Center for Energy Conversion Materials & Physics (CECMP), Soochow University, Suzhou, 215006, P. R. China.
ORCID-Profile: Liang Li
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Jiangsu Province
- Priority Academic Program Development (PAPD) of Jiangsu Higher Education Institutions
Zitieren
APA
Min, L., Sun, H., Guo, L., Zhou, Y., Wang, M., Cao, F., & Li, L. (2024). Pyroelectric‐Accelerated Perovskite Photodetector for Picosecond Light Detection and Ranging. Advanced Materials, 36(26). https://doi.org/10.1002/adma.202400279
Vancouver
Min L, Sun H, Guo L, Zhou Y, Wang M, Cao F, et al. Pyroelectric‐Accelerated Perovskite Photodetector for Picosecond Light Detection and Ranging. Advanced Materials. 2024;36(26). doi:10.1002/adma.202400279
BibTeX
@article{Min2024,
author = {Min, Liangliang and Sun, Haoxuan and Guo, Linqi and Zhou, Yicheng and Wang, Meng and Cao, Fengren and Li, Liang},
title = {Pyroelectric‐Accelerated Perovskite Photodetector for Picosecond Light Detection and Ranging},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {26},
doi = {10.1002/adma.202400279}
}
EUVIMED