EUVIMEDEUVIMED entdecken
Crossref

Ultra‐High Temperature Operated Ni‐Rich Cathode Stabilized by Thermal Barrier for High‐Energy Lithium‐Ion Batteries

Zhongsheng Dai, Yun Liu, Xia Lu, Huiling Zhao, Ying Bai iD

Advanced Materials · 2024-06 · 36 (24)

DOI: 10.1002/adma.202313500 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 19.03.2024. Verfasst von Zhongsheng Dai und 4 weiteren Autor:innen. Beteiligte Einrichtung: International Joint Research Laboratory of New Energy Materials and Devices of Henan Province, School of Physics and Electronics, Academy for Advance…. Die Arbeit wurde bisher 94-mal zitiert (Crossref) und nennt 30 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Zhongyuan Thousand Talents Program of Henan Province, Henan Overseas Expertise Introduction Center for Discipline Innovation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The pursuit of high energy density batteries has expedited the fast development of Ni‐rich cathodes. However, the chemo‐mechanical degradation induced by local thermal accumulation and anisotropic lattice strain is posing great obstacles for its wide applications. Herein, a highly‐antioxidative BaZrO 3 thermal barrier engineered LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathode through an in situ construction strategy is first reported to circumvent the above issues. It is found that the Zr ions are incorporated to Ni‐rich material lattice and influence on the topotactic lithiation as well as enhance the oxygen electronegativity through the rigid Zr─O bonds, which effectively alleviates the lattice strain propagation and decreases the excessive oxidization of lattice oxygen for charge compensation. More importantly, the BaZrO 3 thermal barrier with an ultra‐low thermal conductivity validly impedes the fast heat exchange between electrode and electrolyte to mitigate the severe surface side reactions. This helps an ultra‐high mass loading Li‐ion pouch cell deliver a specific energy density of 690 Wh kg −1 at active material level and an excellent capacity retention of 92.5% after 1400 cycles under 1 C at 25 °C. Tested at a high temperature of 55 °C, the pouch type full‐cell also exhibits 88.7% in capacity retention after 1200 cycles.

Schlagwörter

Stichwörter der Autor:innen

Ni‐rich cathodesin situ constructionstress–strainstructure stabilitiesthermal safety

Autor:innen und Institutionen

  • International Joint Research Laboratory of New Energy Materials and Devices of Henan Province, School of Physics and Electronics, Academy for Advanced Interdisciplinary Studies, Henan University, Kaifeng, 475004, P. R.…
  • School of Metallurgy and Environment, Central South University, Changsha, 410083, P. R. China.
  • School of Materials, Sun Yat-sen University, Shenzhen, 518107, P. R. China.

ORCID-Profile: Ying Bai

Förderung

  • National Natural Science Foundation of China
  • Zhongyuan Thousand Talents Program of Henan Province
  • Henan Overseas Expertise Introduction Center for Discipline Innovation
  • Program for Innovative Research Team in Science and Technology
  • University of Henan Province
  • Science and Technology Development Project of Henan Province
  • Henan University

Zitieren

APA

Dai, Z., Liu, Y., Lu, X., Zhao, H., & Bai, Y. (2024). Ultra‐High Temperature Operated Ni‐Rich Cathode Stabilized by Thermal Barrier for High‐Energy Lithium‐Ion Batteries. Advanced Materials, 36(24). https://doi.org/10.1002/adma.202313500

Vancouver

Dai Z, Liu Y, Lu X, Zhao H, Bai Y. Ultra‐High Temperature Operated Ni‐Rich Cathode Stabilized by Thermal Barrier for High‐Energy Lithium‐Ion Batteries. Advanced Materials. 2024;36(24). doi:10.1002/adma.202313500

BibTeX
@article{Dai2024,
  author = {Dai, Zhongsheng and Liu, Yun and Lu, Xia and Zhao, Huiling and Bai, Ying},
  title = {Ultra‐High Temperature Operated Ni‐Rich Cathode Stabilized by Thermal Barrier for High‐Energy Lithium‐Ion Batteries},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {24},
  doi = {10.1002/adma.202313500}
}
Kostenlos starten →