EUVIMEDEUVIMED entdecken
Crossref

Backside Coating for Stable Zn Anode with High Utilization Rate

Nute Yang, Yong Gao, Fan Bu, Qinghe Cao, Jiayu Yang, Jiaojiao Cui, Yuxuan Wang, Jipeng Chen, Xiangye Liu, Cao Guan iD

Advanced Materials · 2024-06 · 36 (26)

DOI: 10.1002/adma.202312934 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 25.03.2024. Verfasst von Nute Yang und 9 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Flexible Electronics, Northwestern Polytechnical University, Xi'an, 710072, China. Die Arbeit wurde bisher 70-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: National Key Research and Development Program, Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University, Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Stable Zn anodes with high utilization rate are urgently required to promote the specific and volumetric energy densities of Zn‐ion batteries for practical applications. Herein, contrary to the widely utilized surface coating on Zn anodes, this work shows that a zinc foil with a backside coated layer delivers much enhanced cycling stability even under high depth of discharge. The backside coating significantly reduces stress concentration, accelerates heat diffusion, and facilitates electron transfer, thus effectively preventing dendrite growth and structural damage at high Zn utilization. As a result, the developed anode can be stably cycled for 334 h at 85.5% Zn utilization, which outperforms bare Zn and previously reported results on surface‐coated Zn foils. An NVO‐based full cell also shows stable performance with high Zn utilization rate (69.4%), low negative‐positive electrodes ratio (1.44), and high specific/volumetric energy densities (155.8 Wh kg −1 /178 Wh L −1 ), which accelerates the progress toward practical zinc‐ion batteries.

Schlagwörter

Stichwörter der Autor:innen

Zn utilization ratebackside coatinghigh energy densitystabilityzinc anode

Autor:innen und Institutionen

  • Institute of Flexible Electronics, Northwestern Polytechnical University, Xi'an, 710072, China.
  • Key laboratory of Flexible Electronics of Zhejiang Province, Ningbo Institute of Northwestern Polytechnical University, 218 Qingyi Road, Ningbo, 315103, China.
  • Department of Materials Science and Engineering, National University of Singapore, Singapore, 117576, Singapore.

ORCID-Profile: Cao Guan

Förderung

  • National Key Research and Development Program
  • Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University
  • Fundamental Research Funds for the Central Universities
  • National Key Research and Development Program of China

Zitieren

APA

Yang, N., Gao, Y., Bu, F., Cao, Q., Yang, J., Cui, J., Wang, Y., Chen, J., Liu, X., & Guan, C. (2024). Backside Coating for Stable Zn Anode with High Utilization Rate. Advanced Materials, 36(26). https://doi.org/10.1002/adma.202312934

Vancouver

Yang N, Gao Y, Bu F, Cao Q, Yang J, Cui J, et al. Backside Coating for Stable Zn Anode with High Utilization Rate. Advanced Materials. 2024;36(26). doi:10.1002/adma.202312934

BibTeX
@article{Yang2024,
  author = {Yang, Nute and Gao, Yong and Bu, Fan and Cao, Qinghe and Yang, Jiayu and Cui, Jiaojiao and Wang, Yuxuan and Chen, Jipeng and Liu, Xiangye and Guan, Cao},
  title = {Backside Coating for Stable Zn Anode with High Utilization Rate},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {26},
  doi = {10.1002/adma.202312934}
}
Kostenlos starten →