Thickness of Nanoscale Poly(Dimethylsiloxane) Layers Determines the Motion of Sliding Water Drops
Advanced Materials · 2024-07 · 36 (29)
DOI: 10.1002/adma.202311470 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 27.05.2024. Verfasst von Xiaoteng Zhou und 8 weiteren Autor:innen. Beteiligte Einrichtung: Max Planck Institute for Polymer Research, Ackermannweg 10, 55128, Mainz, Germany. Die Arbeit wurde bisher 43-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: China Scholarship Council, Deutsche Forschungsgemeinschaft, HORIZON EUROPE European Research Council.
Abstract (Originalsprache)
Layers of nanometer thick polydimethylsiloxane (PDMS) are applied as hydrophobic coatings because of their environmentally friendly and chemically inert properties. In applications such as heat exchangers or fog harvesting, low water drop friction on surfaces is required. While the onset of motion (static friction) has been studied, the knowledge of dynamic friction needs to be improved. To minimize drop friction, it is essential to understand which processes lead to energy dissipation and cause dynamic friction? Here, the dynamic friction of drops on PDMS brushes of different thicknesses is measured, covering the whole available velocity regime. The brush thickness L turns out to be a predictor for drop friction. 4–5 nm thick PDMS brush shows the lowest dynamic friction. A certain minimal thickness is necessary to form homogeneous surfaces and reduce the attractive van der Waals interaction between water and the substrate. The increase in dynamic friction above L = 5 nm is also attributed to the increasing viscoelastic dissipation of the capillary ridge formed at the contact line. The height of the ridge is related to the brush thickness. Fluorescence correlation spectroscopy and atomic force measurements support this interpretation. Sum‐frequency generation further indicates a maximum order at the PDMS–water interface at intermediate thickness.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Max Planck Institute for Polymer Research, Ackermannweg 10, 55128, Mainz, Germany.
- School of Mechanical Engineering, Southeast University, Nanjing, 211189, China.
- Institute for Physics, Johannes Gutenberg University Mainz, Staudingerweg 10, 55128, Mainz, Germany.
ORCID-Profile: Xiaoteng Zhou, Hans-Jürgen Butt
Förderung
- China Scholarship Council
- Deutsche Forschungsgemeinschaft
- HORIZON EUROPE European Research Council
Zitieren
APA
Zhou, X., Wang, Y., Li, X., Sudersan, P., Amann-Winkel, K., Koynov, K., Nagata, Y., Berger, R., & Butt, H. J. (2024). Thickness of Nanoscale Poly(Dimethylsiloxane) Layers Determines the Motion of Sliding Water Drops. Advanced Materials, 36(29). https://doi.org/10.1002/adma.202311470
Vancouver
Zhou X, Wang Y, Li X, Sudersan P, Amann-Winkel K, Koynov K, et al. Thickness of Nanoscale Poly(Dimethylsiloxane) Layers Determines the Motion of Sliding Water Drops. Advanced Materials. 2024;36(29). doi:10.1002/adma.202311470
BibTeX
@article{Zhou2024,
author = {Zhou, Xiaoteng and Wang, Yongkang and Li, Xiaomei and Sudersan, Pranav and Amann-Winkel, Katrin and Koynov, Kaloian and Nagata, Yuki and Berger, Rüdiger and Butt, Hans-Jürgen},
title = {Thickness of Nanoscale Poly(Dimethylsiloxane) Layers Determines the Motion of Sliding Water Drops},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {29},
doi = {10.1002/adma.202311470}
}
EUVIMED