Building Stable Anodes for High‐Rate Na‐Metal Batteries
Advanced Materials · 2024-04 · 36 (16)
DOI: 10.1002/adma.202311256 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Advanced Materials, online erschienen am 15.01.2024. Verfasst von Xihao Wang und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Science, Harbin Institute of Technology (Shenzhen), Shenzhen, 518055, China. Die Arbeit wurde bisher 121-mal zitiert (Crossref) und nennt 389 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Shenzhen Science and Technology Innovation Program, Shenzhen Steady Support Plan.
Abstract (Originalsprache)
Due to low cost and high energy density, sodium metal batteries (SMBs) have attracted growing interest, with great potential to power future electric vehicles (EVs) and mobile electronics, which require rapid charge/discharge capability. However, the development of high‐rate SMBs has been impeded by the sluggish Na + ion kinetics, particularly at the sodium metal anode (SMA). The high‐rate operation severely threatens the SMA stability, due to the unstable solid‐electrolyte interface (SEI), the Na dendrite growth, and large volume changes during Na plating‐stripping cycles, leading to rapid electrochemical performance degradations. This review surveys key challenges faced by high‐rate SMAs, and highlights representative stabilization strategies, including the general modification of SMB components (including the host, Na metal surface, electrolyte, separator, and cathode), and emerging solutions with the development of solid‐state SMBs and liquid metal anodes; the working principle, performance, and application of these strategies are elaborated, to reduce the Na nucleation energy barriers and promote Na + ion transfer kinetics for stable high‐rate Na metal anodes. This review will inspire further efforts to stabilize SMAs and other metal (e.g., Li, K, Mg, Zn) anodes, promoting high‐rate applications of high‐energy metal batteries towards a more sustainable society.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Science, Harbin Institute of Technology (Shenzhen), Shenzhen, 518055, China.
- Guangdong Provincial Key Laboratory of Materials and Technologies for Energy Conversion, Guangdong Technion-Israel Institute of Technology, Shantou, 515063, China.
- Department of Chemistry, Guangdong Technion-Israel Institute of Technology, Shantou, 515063, China.
- State Key Laboratory of Advanced Welding and Joining, School of Materials Science and Engineering, Harbin Institute of Technology (Shenzhen), Shenzhen, 518055, China.
- School of Electrical Engineering, Zhejiang University of Water Resources and Electric Power, Hangzhou, 310018, China.
ORCID-Profile: Jingyu Lu, Weiran Zheng, Hongbin Liu, Deping Li, Lijie Ci
Förderung
- National Natural Science Foundation of China
- Shenzhen Science and Technology Innovation Program
- Shenzhen Steady Support Plan
- Guangdong Provincial Key Laboratory of Materials and Technology for Energy Conversion
- Guangdong Technion-Israel Institute of Technology
Zitieren
APA
Wang, X., Lu, J., Wu, Y., Zheng, W., Zhang, H., Bai, T., Liu, H., Li, D., & Ci, L. (2024). Building Stable Anodes for High‐Rate Na‐Metal Batteries. Advanced Materials, 36(16). https://doi.org/10.1002/adma.202311256
Vancouver
Wang X, Lu J, Wu Y, Zheng W, Zhang H, Bai T, et al. Building Stable Anodes for High‐Rate Na‐Metal Batteries. Advanced Materials. 2024;36(16). doi:10.1002/adma.202311256
BibTeX
@article{Wang2024,
author = {Wang, Xihao and Lu, Jingyu and Wu, Yehui and Zheng, Weiran and Zhang, Hongqiang and Bai, Tiansheng and Liu, Hongbin and Li, Deping and Ci, Lijie},
title = {Building Stable Anodes for High‐Rate Na‐Metal Batteries},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {16},
doi = {10.1002/adma.202311256}
}
EUVIMED