EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Chemical Circularity in 3D Printing with Biobased Δ‐Valerolactone

Liang Yue iD, Yong-Liang Su, Mingzhe Li, Luxia Yu, Xiaohao Sun, Jaehyun Cho, Blair Brettmann, Will R Gutekunst, Rampi Ramprasad, H Jerry Qi iD

Advanced Materials · 2024-08 · 36 (34)

DOI: 10.1002/adma.202310040 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 07.02.2024. Verfasst von Liang Yue und 9 weiteren Autor:innen. Beteiligte Einrichtung: The George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Office of Naval Research, Georgia Tech Institute for Electronics and Nanotechnology, National Nanotechnology Coordinated Infrastructure.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Digital Light Processing (DLP) is a vat photopolymerization‐based 3D printing technology that fabricates parts typically made of chemically crosslinked polymers. The rapidly growing DLP market has an increasing demand for polymer raw materials, along with growing environmental concerns. Therefore, circular DLP printing with a closed‐loop recyclable ink is of great importance for sustainability. The low‐ceiling temperature alkyl‐substituted δ‐valerolactone (VL) is an industrially accessible biorenewable feedstock for developing recyclable polymers. In this work, acrylate‐functionalized poly(δ‐valerolactone) (PVLA), synthesized through the ring‐opening transesterification polymerization of VL, is used as a platform photoprecursor to improve the chemical circularity in DLP printing. A small portion of photocurable reactive diluent (RD) turns the unprintable PVLA into DLP printable ink. Various photocurable monomers can serve as RDs to modulate the properties of printed structures for applications like sacrificial molds, soft actuators, sensors, etc. The intrinsic depolymerizability of PVLA is well preserved, regardless of whether the printed polymer is a thermoplastic or thermoset. The recovery yield of virgin quality VL monomer is 93% through direct bulk thermolysis of the printed structures. This work proposes the utilization of depolymerizable photoprecursors and highlights the feasibility of biorenewable VL as a versatile material platform toward circular DLP printing.

Schlagwörter

Stichwörter der Autor:innen

3D printingadditive manufacturingrecyclingsustainabilityupcycling

Autor:innen und Institutionen

  • The George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA.
  • School of Chemistry and Biochemistry, Georgia Institute of Technology, Atlanta, GA, 30332, USA.
  • School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA.
  • School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA.
  • Rewable Bioproduct Institute, Georgia Institute of Technology, Atlanta, GA, 30332, USA.

ORCID-Profile: Liang Yue, H Jerry Qi

Förderung

  • Office of Naval Research
  • Georgia Tech Institute for Electronics and Nanotechnology
  • National Nanotechnology Coordinated Infrastructure
  • National Science Foundation

Zitieren

APA

Yue, L., Su, Y. L., Li, M., Yu, L., Sun, X., Cho, J., Brettmann, B., Gutekunst, W. R., Ramprasad, R., & Qi, H. J. (2024). Chemical Circularity in 3D Printing with Biobased Δ‐Valerolactone. Advanced Materials, 36(34). https://doi.org/10.1002/adma.202310040

Vancouver

Yue L, Su YL, Li M, Yu L, Sun X, Cho J, et al. Chemical Circularity in 3D Printing with Biobased Δ‐Valerolactone. Advanced Materials. 2024;36(34). doi:10.1002/adma.202310040

BibTeX
@article{Yue2024,
  author = {Yue, Liang and Su, Yong-Liang and Li, Mingzhe and Yu, Luxia and Sun, Xiaohao and Cho, Jaehyun and Brettmann, Blair and Gutekunst, Will R and Ramprasad, Rampi and Qi, H Jerry},
  title = {Chemical Circularity in 3D Printing with Biobased Δ‐Valerolactone},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {34},
  doi = {10.1002/adma.202310040}
}
Kostenlos starten →