EUVIMEDEUVIMED entdecken
Crossref

Microfluidic‐Assisted 3D Printing Zinc Powder Anode with 2D Conductive MOF/MXene Heterostructures for High‐Stable Zinc−Organic Battery

Hongyu Lu, Jisong Hu, Kaiqi Zhang, Jingxin Zhao, Shenzhen Deng, Yujie Li, Bingang Xu, Huan Pang iD

Advanced Materials · 2024-02 · 36 (6)

DOI: 10.1002/adma.202309753 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 06.12.2023. Verfasst von Hongyu Lu und 7 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, 150001, P. R. China. Die Arbeit wurde bisher 94-mal zitiert (Crossref) und nennt 42 Literaturangaben. Gefördert von: Research Grants Council of Hong Kong, Natural Science Foundation of Shandong Province China, The Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Zinc powder (Zn‐P) anodes have significant advantages in terms of universality and machinability compared with Zn foil anodes. However, their rough surface, which has a high surface area, intensifies the uncontrollable growth of Zn dendrites and parasitic side reactions. In this study, an anti‐corrosive Zn‐P‐based anode with a functional layer formed from a MXene and Cu‐THBQ (MXene/Cu‐THBQ) heterostructure is successfully fabricated via microfluidic‐assisted 3D printing. The unusual anti‐corrosive and strong adsorption of Zn ions using the MXene/Cu‐THBQ functional layer can effectively homogenize the Zn ion flux and inhibit the hydrogen evolution reaction (HER) during the repeated process of Zn plating/stripping, thus achieving stable Zn cycling. Consequently, a symmetric cell based on Zn‐P with the MXene/Cu‐THBQ anode exhibits a highly reversible cycling of 1800 h at 2 mA cm −2 /1 mAh cm −2 . Furthermore, a Zn‐organic full battery matched with a 4‐hydroxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl organic cathode riveted on graphene delivers a high reversible capacity and maintains a long cycle life.

Schlagwörter

Stichwörter der Autor:innen

2D conductive metal-organic frameworks2D heterostructuresMXeneszinc powder anodeszinc-organic batteries

Autor:innen und Institutionen

  • State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin, 150001, P. R. China.
  • School of Optical and Electronic Information, Huazhong University of Science and Technology, Wuhan, 430074, P. R. China.
  • School of Marine Science and Technology, Harbin Institute of Technology at Weihai, Weihai, 264209, P. R. China.
  • Nanotechnology Center, School of Fashion and Textiles, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, 999077, P. R. China.
  • School of Chemistry and Chemical Engineering, Yangzhou University, Yangzhou, 225002, P. R. China.

ORCID-Profile: Huan Pang

Förderung

  • Research Grants Council of Hong Kong
  • Natural Science Foundation of Shandong Province China
  • The Fundamental Research Funds for the Central Universities

Zitieren

APA

Lu, H., Hu, J., Zhang, K., Zhao, J., Deng, S., Li, Y., Xu, B., & Pang, H. (2024). Microfluidic‐Assisted 3D Printing Zinc Powder Anode with 2D Conductive MOF/MXene Heterostructures for High‐Stable Zinc−Organic Battery. Advanced Materials, 36(6). https://doi.org/10.1002/adma.202309753

Vancouver

Lu H, Hu J, Zhang K, Zhao J, Deng S, Li Y, et al. Microfluidic‐Assisted 3D Printing Zinc Powder Anode with 2D Conductive MOF/MXene Heterostructures for High‐Stable Zinc−Organic Battery. Advanced Materials. 2024;36(6). doi:10.1002/adma.202309753

BibTeX
@article{Lu2024,
  author = {Lu, Hongyu and Hu, Jisong and Zhang, Kaiqi and Zhao, Jingxin and Deng, Shenzhen and Li, Yujie and Xu, Bingang and Pang, Huan},
  title = {Microfluidic‐Assisted 3D Printing Zinc Powder Anode with 2D Conductive MOF/MXene Heterostructures for High‐Stable Zinc−Organic Battery},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {6},
  doi = {10.1002/adma.202309753}
}
Kostenlos starten →