EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Revealing the Deposition Mechanism of the Powder Aerosol Deposition Method Using Ceramic Oxide Core–Shell Particles

Mario Linz iD, Florian Bühner, Daniel Paulus iD, Lukas Hennerici iD, Yiran Guo, Valeriu Mereacre, Ulrich Mansfeld, Martin Seipenbusch, Jaroslaw Kita iD, Ralf Moos iD

Advanced Materials · 2024-02 · 36 (7)

DOI: 10.1002/adma.202308294 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 07.12.2023. Verfasst von Mario Linz und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Functional Materials, University of Bayreuth, Universitätsstraße 30, 95447, Bayreuth, Germany. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry of Education and Research, Deutsche Forschungsgemeinschaft, Bayerisches Zentrum für Batterietechnik (BayBatt).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The powder aerosol deposition (PAD) method is a process to manufacture ceramic films completely at room temperature. Since the first reports by Akedo in the late 1990s, much research has been conducted to reveal the exact mechanism of the deposition process. However, it is still not fully understood. This work tackles this challenge using core–shell particles. Two coated oxides, Al 2 O 3 core with a SiO 2 shell and LiNi 0.6 Mn 0.2 Co 0.2 O 2 core with a LiNbO 3 shell, are investigated. Initially, the element ratios Al:Si and Ni:Nb of the powder are determined by energy‐dispersive X‐ray spectroscopy (EDX). In a second step, the change in the element ratios of Al:Si and Ni:Nb after deposition is investigated. The element ratios from powder to film strongly shift toward the shell elements, indicating that the particles fracture and only the outer parts of the particles are deposited. In the last step, this work investigates cross‐sections of the deposited films with scanning transmission electron microscopy (STEM combined with EDX and an energy‐selective back‐scattered electron (EsB) detector to unveil the element distribution within the film itself. Therefore, the following overall picture emerges: particles impact on the substrate or on previously deposited particle, fracture, and only a small part of the impacting particles that originate from the outer part of the impacting particle gets deposited.

Schlagwörter

Stichwörter der Autor:innen

core-shell particlesdeposition mechanismpowder aerosol deposition method (PAD)room-temperature impact consolidation (RTIC)vacuum kinetic spray (VKS)

Autor:innen und Institutionen

  • Department of Functional Materials, University of Bayreuth, Universitätsstraße 30, 95447, Bayreuth, Germany.
  • Bayerisches Zentrum für Batterietechnik, Weiherstraße 26, 95448, Bayreuth, Germany.
  • Institute of Chemical Process Engineering, University of Stuttgart, 70174, Stuttgart, Germany.
  • Institute for Applied Materials - Energy Storage Systems, Karlsruhe Institute of Technology (KIT-IAM-ESS), 76344, Eggenstein-Leopoldshafen, Germany.
  • Bavarian Polymer Institute (BPI), University of Bayreuth, Universitätsstraße 30, 95447, Bayreuth, Germany.

ORCID-Profile: Mario Linz, Daniel Paulus, Lukas Hennerici, Jaroslaw Kita, Ralf Moos

Förderung

  • Federal Ministry of Education and Research
  • Deutsche Forschungsgemeinschaft
  • Bayerisches Zentrum für Batterietechnik (BayBatt)
  • Bundesministerium für Bildung und Forschung

Zitieren

APA

Linz, M., Bühner, F., Paulus, D., Hennerici, L., Guo, Y., Mereacre, V., Mansfeld, U., Seipenbusch, M., Kita, J., & Moos, R. (2024). Revealing the Deposition Mechanism of the Powder Aerosol Deposition Method Using Ceramic Oxide Core–Shell Particles. Advanced Materials, 36(7). https://doi.org/10.1002/adma.202308294

Vancouver

Linz M, Bühner F, Paulus D, Hennerici L, Guo Y, Mereacre V, et al. Revealing the Deposition Mechanism of the Powder Aerosol Deposition Method Using Ceramic Oxide Core–Shell Particles. Advanced Materials. 2024;36(7). doi:10.1002/adma.202308294

BibTeX
@article{Linz2024,
  author = {Linz, Mario and Bühner, Florian and Paulus, Daniel and Hennerici, Lukas and Guo, Yiran and Mereacre, Valeriu and Mansfeld, Ulrich and Seipenbusch, Martin and Kita, Jaroslaw and Moos, Ralf},
  title = {Revealing the Deposition Mechanism of the Powder Aerosol Deposition Method Using Ceramic Oxide Core–Shell Particles},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {7},
  doi = {10.1002/adma.202308294}
}
Kostenlos starten →