Defect Passivation and Lithium Ion Coordination Via Hole Transporting Layer Modification for High Performance Inorganic Perovskite Solar Cells
Advanced Materials · 2024-01 · 36 (4)
DOI: 10.1002/adma.202306982 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 03.12.2023. Verfasst von Yali Liu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineeri…. Die Arbeit wurde bisher 55-mal zitiert (Crossref) und nennt 71 Literaturangaben. Gefördert von: Fundamental Research Funds for the Central Universities, Shaanxi Provincial Science Fund for Distinguished Young Scholars, 111 Project.
Abstract (Originalsprache)
Metal halide inorganic perovskite solar cells (PSCs) have great potential to achieve high efficiency with excellent thermal stability. However, the surface defect traps restrain the achievement of high open circuit voltage ( V OC ) and power conversion efficiency (PCE) of the devices due to the severe nonradiative charge recombination. Moreover, the state‐of‐the‐art hole transporting layer (HTL) significantly hampers device moisture stability, even though it renders the highest solar cell efficiency. Herein, a one‐stone‐two‐birds strategy is proposed using a biocompatible material tryptamine (TA) as an additive in HTL. First, TA bearing electron rich moieties can favorably passivate the surface defects of inorganic perovskite films, significantly reducing trap density and prolonging charge lifetime. It results in a drastic improvement of V OC from 1.192 to 1.251 V, with a V OC loss of 0.48 V. The corresponding PSCs achieve a 21.8% PCE under 100 mW cm −2 illumination. Second, TA in HTL can coordinate with lithium cations, retarding their reaction with moisture and increasing the moisture stability of HTL. Consequently, the black phase of inorganic perovskite films is well preserved, and the corresponding PSCs maintain 90% of the initial PCE after 800 h storage at relative humidity of 25–35%, much higher than the control devices.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Applied Surface and Colloid Chemistry, Ministry of Education, Shaanxi Key Laboratory for Advanced Energy Devices, Shaanxi Engineering Lab for Advanced Energy Technology, School of Materials Science and…
- Dalian National Laboratory for Clean Energy; iChEM, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China.
ORCID-Profile: Shengzhong Liu
Förderung
- Fundamental Research Funds for the Central Universities
- Shaanxi Provincial Science Fund for Distinguished Young Scholars
- 111 Project
- Chinese National 1000-talent-plan program
- National Natural Science Foundation of China
- Higher Education Discipline Innovation Project
Zitieren
APA
Liu, Y., Xu, T., Xu, Z., Zhang, H., Yang, T., Wang, Z., Xiang, W., & Liu, S. (2024). Defect Passivation and Lithium Ion Coordination Via Hole Transporting Layer Modification for High Performance Inorganic Perovskite Solar Cells. Advanced Materials, 36(4). https://doi.org/10.1002/adma.202306982
Vancouver
Liu Y, Xu T, Xu Z, Zhang H, Yang T, Wang Z, et al. Defect Passivation and Lithium Ion Coordination Via Hole Transporting Layer Modification for High Performance Inorganic Perovskite Solar Cells. Advanced Materials. 2024;36(4). doi:10.1002/adma.202306982
BibTeX
@article{Liu2024,
author = {Liu, Yali and Xu, Tianfei and Xu, Zhuo and Zhang, Hao and Yang, Tengteng and Wang, Zezhang and Xiang, Wanchun and Liu, Shengzhong},
title = {Defect Passivation and Lithium Ion Coordination Via Hole Transporting Layer Modification for High Performance Inorganic Perovskite Solar Cells},
journal = {Advanced Materials},
year = {2024},
volume = {36},
number = {4},
doi = {10.1002/adma.202306982}
}
EUVIMED