EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Continuous Volumetric 3D Printing: Xolography in Flow

Lucas Stüwe, Matthias Geiger, Franz Röllgen, Thorben Heinze, Marcus Reuter, Matthias Wessling, Stefan Hecht iD, John Linkhorst

Advanced Materials · 2024-01 · 36 (4)

DOI: 10.1002/adma.202306716 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 03.12.2023. Verfasst von Lucas Stüwe und 7 weiteren Autor:innen. Beteiligte Einrichtung: Chemical Process Engineering, RWTH Aachen University, Forckenbeckstr. 51, 52074, Aachen, Germany. Die Arbeit wurde bisher 70-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Werner Siemens-Stiftung.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing techniques continue to improve in resolution, geometrical freedom, and production rates, expanding their application range in research and industry. Most established techniques, however, are based on layer‐by‐layer polymerization processes, leading to an inherent trade‐off between resolution and printing speed. Volumetric 3D printing enables the polymerization of freely defined volumes allowing the fabrication of complex geometries at drastically increased production rates and high resolutions, marking the next chapter in light‐based additive manufacturing. This work advances the volumetric 3D printing technique xolography to a continuous process. Dual‐color photopolymerization is performed in a continuously flowing resin, inside a tailored flow cell. Supported by simulations, the flow profile in the printing area is flattened, and resin velocities at the flow cell walls are increased to minimize unwanted polymerization via laser sheet‐induced curing. Various objects are printed continuously and true to shape with smooth surfaces. Parallel object printing paves the way for up‐scaling the continuous production, currently reaching production rates up to 1.75 mm 3 s −1 for the presented flow cell. Xolography in flow provides a new opportunity for scaling up volumetric 3D printing with the potential to resolve the trade‐off between high production rates and high resolution in light‐based additive manufacturing.

Schlagwörter

Stichwörter der Autor:innen

continuous printingflow profile shapingvolumetric 3D printingxolography

Autor:innen und Institutionen

  • Chemical Process Engineering, RWTH Aachen University, Forckenbeckstr. 51, 52074, Aachen, Germany.
  • xolo GmbH, Volmerstraße 9B, 12489, Berlin, Germany.
  • DWI-Leibniz Institute for Interactive Materials, Forckenbeckstr. 50, 52074, Aachen, Germany.
  • Department of Chemistry, Humboldt-Universität zu Berlin, Brook-Taylor-Street 2, 12489, Berlin, Germany.

ORCID-Profile: Stefan Hecht

Förderung

  • Deutsche Forschungsgemeinschaft
  • Werner Siemens-Stiftung

Zitieren

APA

Stüwe, L., Geiger, M., Röllgen, F., Heinze, T., Reuter, M., Wessling, M., Hecht, S., & Linkhorst, J. (2024). Continuous Volumetric 3D Printing: Xolography in Flow. Advanced Materials, 36(4). https://doi.org/10.1002/adma.202306716

Vancouver

Stüwe L, Geiger M, Röllgen F, Heinze T, Reuter M, Wessling M, et al. Continuous Volumetric 3D Printing: Xolography in Flow. Advanced Materials. 2024;36(4). doi:10.1002/adma.202306716

BibTeX
@article{Stwe2024,
  author = {Stüwe, Lucas and Geiger, Matthias and Röllgen, Franz and Heinze, Thorben and Reuter, Marcus and Wessling, Matthias and Hecht, Stefan and Linkhorst, John},
  title = {Continuous Volumetric 3D Printing: Xolography in Flow},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {4},
  doi = {10.1002/adma.202306716}
}
Kostenlos starten →