EUVIMEDEUVIMED entdecken
Crossref

Revealing the Anion–Solvent Interaction for Ultralow Temperature Lithium Metal Batteries

Jijian Xu iD, Volodymyr Koverga, An Phan, Ai Min Li, Nan Zhang, Minsung Baek, Chamithri Jayawardana, Brett L Lucht, Anh T Ngo, Chunsheng Wang iD

Advanced Materials · 2024-02 · 36 (7)

DOI: 10.1002/adma.202306462 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 07.12.2023. Verfasst von Jijian Xu und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemical and Biomolecular Engineering, University of Maryland, College Park, MD, 20742, USA. Die Arbeit wurde bisher 135-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: Vehicle Technologies Office.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Anion solvation in electrolytes can largely change the electrochemical performance of the electrolytes, yet has been rarely investigated. Herein, three anions of bis(trifluoromethanesulfonyl)imide (TFSI), bis(fluorosulfonyl)imide (FSI), and derived asymmetric (fluorosulfonyl)(trifluoro‐methanesulfonyl)imide (FTFSI) are systematically examined in a weakly Li + cation solvating solvent of bis(3‐fluoropropyl)ether (BFPE). In‐situ liquid secondary ion mass spectrometry demonstrates that FTFSI − and FSI − anions are associated with BFPE solvent, while weak TFSI − /BFPE cluster signals are detected. Molecular modeling further reveals that the anion–solvent interaction is accompanied by the formation of H‐bonding‐like interactions. Anion solvation enhances the Li + cation transfer number and reduces the organic component in solid electrolyte interphase, which enhances the Li plating/stripping Coulombic efficiency at a low temperature of −30 °C from 42.4% in TFSI‐based electrolytes to 98.7% in 1.5 m LiFTFSI and 97.9% in LiFSI‐BFPE electrolytes. The anion–solvent interactions, especially asymmetric anion solvation also accelerate the Li + desolvation kinetics. The 1.5 m LiFTFSI‐BFPE electrolyte with strong anion–solvent interaction enables LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811)||Li (20 µm) full cell with stable cyclability even under −40 °C, retaining over 92% of initial capacity (115 mAh g −1 , after 100 cycles). The anion–solvent interactions insights allow to rational design the electrolyte for lithium metal batteries and beyond to achieve high performance.

Schlagwörter

Stichwörter der Autor:innen

Anion solvationLi metal batteriesasymmetricelectrolyte designlow temperature

Autor:innen und Institutionen

  • Department of Chemical and Biomolecular Engineering, University of Maryland, College Park, MD, 20742, USA.
  • Department of Chemistry, City University of Hong Kong, Kowloon, 999077, Hong Kong.
  • Department of Chemical Engineering, University of Illinois Chicago, Chicago, IL, 60608, USA.
  • Materials Science Division, Argonne National Laboratory, Lemont, IL, 60439, USA.
  • Department of Chemistry, University of Rhode Island, Kingston, Rhode Island, 02881, USA.

ORCID-Profile: Jijian Xu, Chunsheng Wang

Förderung

  • Vehicle Technologies Office

Zitieren

APA

Xu, J., Koverga, V., Phan, A., Min Li, A., Zhang, N., Baek, M., Jayawardana, C., Lucht, B. L., Ngo, A. T., & Wang, C. (2024). Revealing the Anion–Solvent Interaction for Ultralow Temperature Lithium Metal Batteries. Advanced Materials, 36(7). https://doi.org/10.1002/adma.202306462

Vancouver

Xu J, Koverga V, Phan A, Min Li A, Zhang N, Baek M, et al. Revealing the Anion–Solvent Interaction for Ultralow Temperature Lithium Metal Batteries. Advanced Materials. 2024;36(7). doi:10.1002/adma.202306462

BibTeX
@article{Xu2024,
  author = {Xu, Jijian and Koverga, Volodymyr and Phan, An and Min Li, Ai and Zhang, Nan and Baek, Minsung and Jayawardana, Chamithri and Lucht, Brett L and Ngo, Anh T and Wang, Chunsheng},
  title = {Revealing the Anion–Solvent Interaction for Ultralow Temperature Lithium Metal Batteries},
  journal = {Advanced Materials},
  year = {2024},
  volume = {36},
  number = {7},
  doi = {10.1002/adma.202306462}
}
Kostenlos starten →