Scalable Electrodeposition of Liquid Metal from an Acetonitrile‐Based Electrolyte for Highly Integrated Stretchable Electronics
Advanced Materials · 2023-12 · 35 (51)
DOI: 10.1002/adma.202305967 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 10.10.2023. Verfasst von Wouter Monnens und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Engineering, KU Leuven, Kasteelpark Arenberg 44, P. O. box 2450, Leuven, B-3001, Belgium. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 53 Literaturangaben. Gefördert von: Fonds Wetenschappelijk Onderzoek, H2020 European Research Council.
Abstract (Originalsprache)
The advancement of highly integrated stretchable electronics requires the development of scalable sub‐micrometer conductor patterning. Eutectic gallium indium (EGaIn) is an attractive conductor for stretchable electronics, as its liquid metallic character grants it high electrical conductivity upon deformation. However, its high surface tension makes its patterning with sub‐micrometer resolution challenging. In this work, this limitation is overcome by way of the electrodeposition of EGaIn. A non‐aqueous acetonitrile‐based electrolyte that exhibits high electrochemical stability and chemical orthogonality is used. The electrodeposited material leads to low‐resistance lines that remain stable upon (repeated) stretching to a 100% strain. Because electrodeposition benefits from the resolution of mature nanofabrication methods used to pattern the base metal, the proposed “bottom‐up” approach achieves a record‐high density integration of EGaIn regular lines of 300 nm half‐pitch on an elastomer substrate by plating on a gold seed layer prepatterned by nanoimprinting. Moreover, vertical integration is enabled by filling high‐aspect‐ratio vias. This capability is conceptualized by the fabrication of an omnidirectionally stretchable 3D electronic circuit, and demonstrates a soft‐electronic analog of the stablished damascene process used to fabricate microchip interconnects. Overall, this work proposes a simple route to address the challenge of metallization in highly integrated (3D) stretchable electronics.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Materials Engineering, KU Leuven, Kasteelpark Arenberg 44, P. O. box 2450, Leuven, B-3001, Belgium.
- Department of Chemistry, KU Leuven, Celestijnenlaan 200F, P. O. box 2404, Leuven, B-3001, Belgium.
ORCID-Profile: Wouter Monnens, Francisco Molina-Lopez
Förderung
- Fonds Wetenschappelijk Onderzoek
- H2020 European Research Council
Zitieren
APA
Monnens, W., Zhang, B., Zhou, Z., Snels, L., Binnemans, K., Molina-Lopez, F., & Fransaer, J. (2023). Scalable Electrodeposition of Liquid Metal from an Acetonitrile‐Based Electrolyte for Highly Integrated Stretchable Electronics. Advanced Materials, 35(51). https://doi.org/10.1002/adma.202305967
Vancouver
Monnens W, Zhang B, Zhou Z, Snels L, Binnemans K, Molina-Lopez F, et al. Scalable Electrodeposition of Liquid Metal from an Acetonitrile‐Based Electrolyte for Highly Integrated Stretchable Electronics. Advanced Materials. 2023;35(51). doi:10.1002/adma.202305967
BibTeX
@article{Monnens2023,
author = {Monnens, Wouter and Zhang, Bokai and Zhou, Zhenyu and Snels, Laurens and Binnemans, Koen and Molina-Lopez, Francisco and Fransaer, Jan},
title = {Scalable Electrodeposition of Liquid Metal from an Acetonitrile‐Based Electrolyte for Highly Integrated Stretchable Electronics},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {51},
doi = {10.1002/adma.202305967}
}
EUVIMED