3D Printing of High Viscosity UV‐Curable Resin for Highly Stretchable and Resilient Elastomer
Advanced Materials · 2023-12 · 35 (49)
DOI: 10.1002/adma.202304430 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advanced Materials, online erschienen am 05.11.2023. Verfasst von Xianmei Huang und 5 weiteren Autor:innen. Beteiligte Einrichtung: CAS Key Laboratory of Design and Assembly of Functional Nanostructures, Fujian Key Laboratory of Nanomaterials, Fujian Institute of Research on the S…. Die Arbeit wurde bisher 106-mal zitiert (Crossref) und nennt 66 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Elastomers prepared via vat photopolymerizationus ually exhibit unsatisfied mechanical properties owing to their insufficient growth of molecular weight upon UV exposure. Increasing the weight ratio of oligomer in the resin system is an effective approach to enhance the mechanical properties, yet the viscosity of the UV‐curable resin increases dramatically; this hinders its printing. In this study, a linear scan‐based vat photopolymerization (LSVP) system which can print high‐viscosity resins is implemented to 3D print the oligomer‐dominated UV‐curable resin via a dual‐curing mechanism. A polyurethane methacrylate blocking oligomer is first synthesized and then mixed with a commercialized bifunctional oligomer, photoinitiator, and primary amine as a chain extender to prepare high‐viscosity UV‐curable resin for the LSVP system. The deblocked isocyanate is further crosslinked with a chain extender via thermal treatment to construct a highly entangled polymer chain network. The optimal thermal treatment parameters are investigated, and the resilience of the 3D‐printed elastomer is evaluated through continuous tensile loading and unloading tests. Subsequently, complex structured elastomers are printed, exhibiting favorable mechanical durability without defects. The results obtained from this work will provide a reference for preparing elastomeric devices with excellent physical properties and expand the application scope of vat photopolymerization to new fields.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- CAS Key Laboratory of Design and Assembly of Functional Nanostructures, Fujian Key Laboratory of Nanomaterials, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, 350002, China.
- University of Chinese Academy of Sciences, Beijing, 100049, China.
- Key Laboratory of Polymer Materials and Products, College of Materials Science and Engineering, Fujian University of Technology, Fuzhou, 350118, China.
- College of Chemical Engineering and Materials Science, Quanzhou Normal University, Quanzhou, 362000, China.
- Fujian Science & Technology Innovation Laboratory for Optoelectronic Information of China, Fuzhou, 350108, China.
ORCID-Profile: Zixiang Weng
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Huang, X., Peng, S., Zheng, L., Zhuo, D., Wu, L., & Weng, Z. (2023). 3D Printing of High Viscosity UV‐Curable Resin for Highly Stretchable and Resilient Elastomer. Advanced Materials, 35(49). https://doi.org/10.1002/adma.202304430
Vancouver
Huang X, Peng S, Zheng L, Zhuo D, Wu L, Weng Z. 3D Printing of High Viscosity UV‐Curable Resin for Highly Stretchable and Resilient Elastomer. Advanced Materials. 2023;35(49). doi:10.1002/adma.202304430
BibTeX
@article{Huang2023,
author = {Huang, Xianmei and Peng, Shuqiang and Zheng, Longhui and Zhuo, Dongxian and Wu, Lixin and Weng, Zixiang},
title = {3D Printing of High Viscosity UV‐Curable Resin for Highly Stretchable and Resilient Elastomer},
journal = {Advanced Materials},
year = {2023},
volume = {35},
number = {49},
doi = {10.1002/adma.202304430}
}
EUVIMED